Dr. James E. McGrath
Publications and Patents

Books
Book Chapters and Reviews:
| 1970-1979 | 1980-1989 | 1990-1999 | 2000-present |
Research Articles:
|1960-1969 | 1970-1979 | 1980-1989 | 1990-1999 | 2000-present |
Prepublications:
| 1965-1979 | 1980-1989 | 1990-1999 | 2000-present |
U.S. Patents:
| 1968-1974 | 1985-1989 | 1990-1999 | 2000-present |
Presented Papers (a partial list):
| 1960-1969 | 1970-1979 | 1980-1989 | 1990-1999 | 2000-present |

Books:

1. A Noshay and J.E. McGrath, "Block Copolymers: Overview and Critical Survey," 520 pages, Academic Press, New York, January 1977.
2. Editor, "Anionic Polymerization: Kinetics, Mechanisms, and Synthesis," 592 pages, ACS Symposium Series, No. 166, November 1981.
3. Editor, "Ring Opening Polymerization: Kinetics, Mechanisms, and Synthesis," ACS Symposium Series, No. 286 (1985).
4. Editor (with B. M. Culbertson), "Advances in Polymer Synthesis," Vol. 31, Plenum Press, New York (1985).
5. I. Yilgor and J.E.McGrath, "Advances in Organosiloxane Copolymers," Advances in Polymer Science, pp. 1-86, Springer-Verlag, Heidelberg, 1988.
6. Editor (with C. Feger and M. M. Khojastech), "Polyimides: Materials, Chemistry, and Characterization, Elsevier (1989).
7. J.E. McGrath, D.L. Dunson, S.J. Mecham, and J.L. Hedrick, “Synthesis and Characterization of Segmented Polyimide-Polyorganosiloxane Copolymers,” Advances in Polymer Science, Vol. 140, p. 61 (1999).
8. P. Arjunan, J.E. McGrath, T.L. Hanlon, Editors, “Advances in Olefin Polymerization,” ACS Symposium Series (1999).
9. Hedrick, J. L.; Carter, K. R.; Labadie, J. W.; Miller, R. D.; Volksen, W.; Hawker, C. J.; Yoon, D. Y.; Russell, T. P.; McGrath, J. E.; Briber, R. M. Nanoporous polymides. Advances in Polymer Science (1999), 14 (Progress in Polyimide Chemistry II), 1-43.

| back to top |

1. M. Matzner, L. J. Fetters, L. M. Robeson, and J. E. McGrath, "Polystyrene-Polyalpha-methyl styrene A-B Block Copolymers, in Recent Advances in Polymer Blends, Blocks, and Grafts," p. 281-292, L. H. Sperling, Ed., Plenum Press, New York (1974).
2. J. E. McGrath, M. Matzner, and L. M. Robeson, "Polysulfone-Nylon 6 Block Copolymers and Alloys," Polymer Science and Technology, Volume 4, p. 195-211, Plenum Press (1974).
3. M. Matzner, D. L. Schober, L. M. Robeson, R. N. Johnson, and J. E. McGrath, "Polyethylene-Nylon 6 Graft Copolymers and Alloys: in Polymer Science and Technology," Vol. 6, "Permeability of Plastic Films and Coatings to Gases, Vapors, and Liquids," p. 125-136, H. B. Hopfenberg, Ed., Plenum Press, New York (1974).
4. J. E. McGrath, M. Matzner, A. Noshay, and L. M. Robeson, "Encyclopedia of Polymer Science and Technology" (Wiley, New York). Review on Block and Graft Copolymers, Supplement 2 (1977), p. 129-158.
5. J. E. McGrath, L. M. Robeson, E. W. Wise, T. L. Nowlin, and B. L. Joesten, "Synthesis and Characterization of Ethylene-Ethyl Acrylate-Carbon Monoxide Terpolymers," "Advances in Polymer Spectroscopy," E. G. Brame, Ed., Plenum Press (1978), p 42-54.
6. L. M. Robeson, A. G. Farnham, and J. E. McGrath, "Dynamic Mechanical Characteristics of Polysulfone and Other Polyarylethers, in Molecular Basis for Transitions and Relaxations," D. J. Meier, Ed., Midland Macromolecular Institute Monographs, Volume 4, p. 405-526, Gordon and Breach (1978).
7. J. E. McGrath, "Elastomers, Synthetic (Survey)," Kirk-Othmer, Encyclopedia of Chemical Technology, Volume 8, Third Edition. Copyright by John Wiley & Sons, Inc. (1979), p. 446-459.

| back to top |

1980 - 1989

1. J. E. McGrath, An Introduction and Overview of Block Copolymers, in "Block Copolymers," D. J. Meier, Ed., MMI Press (1983), p. 112.
2. J. E. McGrath, "Synthesis of Block, Graft, Segmented, and Ion Containing Copolymers," Pure and Applied Chemistry, 55(10), 1573-85 (1983).
3. M. A. Dinno, Y. Kang, D. R. Lloyd, J. E. McGrath, and J. P. Wightman, "Characterization of Dense Sulfonated Polysulfone Membranes," Physicochemical Aspects of Polymer Surfaces, Vol. 1, K. L. Mittal, Ed., Plenum Publishing Corporation, New York, p. 347-366 (1983).
4. E. Yorkgitis, C. Tran, N. Eiss, I. Yilgor, G. L. Wilkes, and J. E. McGrath, "Siloxane Modifiers for Epoxy Resins," Advances in Chem., No. 208, 137-163 (1984).
5. E. Yorkgitis, C. Tran, N. Eiss, G. L. Wilkes, and J. E. McGrath, "A Review of Siloxane Modified Epoxy Networks," Advances in Poly. Sci., No. 72, 79-109 (1985).
6. I. Yilgor, J. S. Riffle, and J. E. McGrath, "Reactive Siloxane Oligomers," in Reactive Oligomers, F. Harris, Ed., ACS Symposium Series (1985).
7. J. E. McGrath, "Ring Opening Polymerization: An Introduction," in "Ring Opening Polymerization: Kinetics and Synthesis," J. E. McGrath, Ed., ACS Symposium Series, No. 286 (1985).
8. P. M. Sormani and J. E. McGrath, "Kinetics and Mechanisms of the Anionic Ring Opening Polymerization of Cyclosiloxanes in the Presence of Bis(1,3-Aminopropyl Tetramethyldisiloxane)" in "Ring Opening Polymerization: Kinetics, Mechanisms, and Synthesis," J. E. McGrath, Ed., ACS Symposium Series, No. 286 (1985).
9. R. D. Allen, I. Yilgor, and J. E. McGrath, "Synthesis of Ion Containing Polymers," in "Ion Containing Polymers," A. Eisenberg, Ed. (1985).
10. R. D. Allen, T. E. Long, and J. E. McGrath, "Synthesis of Tactic Poly(Alkyl Methacrylate) Homo- and Copolymers," in "Advances in Polymer Synthesis," J. E. McGrath and B. M. Culbertson, Eds., Vol. 31, 347-362, Plenum Press, New York (1985).
11. J. M. Lambert, D. C. Webster, and J. E. McGrath, "Synthesis of Segmented Poly(Arylene Ether Sulfone)-Poly(Arylene Terephthalate) Copolymers," in "Advances in Polymer Synthesis," J. E. McGrath and B. M. Culbertson, Eds., Vol. 31, Plenum Press, New York (1985).
12. D. K. Mohanty and J. E. McGrath, "Synthesis and Characterization of Poly(Arylene Ether Sulfones) and Poly(Arylene Ether Ketones) Derived from Tetramethyl Bisphenol A," in "Polymer Synthesis," J. E. McGrath and B. M. Culbertson, Eds., Vol. 31, Plenum Press, New York (1985).
13. D. Tyagi, G. L. Wilkes, B. Lee, and J. E. McGrath, "Morphology and Properties of Segmented Polyurethane-Urea Copolymers Prepared via t-Butyl Alcohol 'Chain Extension'," Advances in Elastomers and Rubber Elasticity, J. Lal and J. Mark, Eds., ACS Symposium Series (1986).
14. R. D. Allen, I. Yilgor, and J. E. McGrath, "Studies on the Synthesis of Novel Block Ionomers," ACS Symposium Series, No. 302, 81-92 (1986).
15. B. Lee, J. E. McGrath, G. L. Wilkes, and D. Tyagi, "Synthesis and Characterization of Novel Polyether-Urethane Ureas: 'Chain Extension' with Tertiary Alcohols," SAGAMORE Conference on Elastomers, R. Singler, Ed. (1986).
16. J. M. Hoover, T. C. Ward, and J. E. McGrath, "The Influence of Hydrogenation on the Chemical Structure-Physical Property Relationships of Star Block Copolymers Based on Tertiary Butylstyrene-Isoprene and Divinylbenzene," ACS Symposium Series, "Advances in Polyolefins," T. Cheng, Ed., (1987).
17. J. E. McGrath, "Thermoplastic Elastomer Studies - 1966-1986," in Thermoplastic Elastomers: A Comprehensive Review, Chapter 12, sec. 8, pp. 465-481, N. R. Legge, G. Holden, H. Schroeder, Eds., Hanson, Munchen, West Germany, (1987).
18. J. E. McGrath, "Polymers, Synthesis," in The Encyclopedia of Physical Science & Technology, Robert A. Meyers, Ed., Academic Press, Inc., Vol. 11, p 120-142 (1987).
19. A. D. Broske, T. L. Huang, R. D. Allen, J. M. Hoover, and J. E. McGrath, "Investigations of Hydrocarbon Soluble Difunctional Organolithium Initiators Based Upon l-3-Bis(Phenyl Ethenyl Benzene)" in Recent Advances in Anionic Polymerization, pp. 363-380, T. E. Hogen-Esch and J. Smid, Eds., Elsevier (1987).
20. M. J. Bowden, A. S. Gozdz, C. Klausner, J. E. McGrath, and S. Smith, "Lithographic Evaluation of Poly(methyl methacrylate)graft-poly (dimethylsiloxane) Copolymers," M. J. Bowden and S. R. Turner, Editors, "Polymers for High Technology Electronics and Photonics," ACS Symposium Series No. 346, pp. 122-137 (1987).
21. T. E. Long, R. D. Allen, and J. E. McGrath, "Controlled Synthesis of Various Poly(Alkyl Methacrylates) by Anionic Techniques," in Recent Advances in Mechanistic and Synthetic Aspects of Polymerization, Series C Vol. 215, Chap. 2, p.79, M. Fontanille and A. Guyot, Editors, D. Reidel Publishing Company (1987).
22. G. Huynh-Ba and J. E. McGrath, "Pyridine-Mediated Anionic Homoand Copolymerization of Alkylmethacrylate," in Recent Advances in Anionic Polymerization, p. 173-184, T. E. Hogen-Esch, PhD and J. Smid, PhD, Editors, Elsevier Science Publishing Company (1987).
23. J. E. McGrath, J. P. Pullockaren, J. S. Riffle, S. Kilic, and C. S. Elsbernd, "Sol-Gel Networks: Fundamental Chemical Studies of Hydrolysis, Condensation,, and Polysiloxane Toughening of Tetraethylorthosilicate (TEOS) Systems," in Ultrastructure Processing of Advanced Ceramics, Chap. 3, J. D. Mackenzie, Editor, John Wiley & Sons, Inc. Publishers (1988).
24. J. D. Summers, C. S. Elsbernd, P. M. Sormani, P. J. A. Brandt, C. A. Arnold, I. Yilgor, J. S. Riffle, S. Kilic, and J. E. McGrath, "Recent Advances in Organosiloxane Copolymers," in Inorganic and Organometallic Polymers, M. Zeldin and K. Wynne, Ed., ACS Symposium Series No. 360, Chap. 14, p 180 (1988).
25. T. E. Long, R. D. Allen, and J. E. McGrath, "Synthesis and Characterization of Block Copolymers Containing Acid and Ionomeric Functionalities," in Chemical Reactions in Polymers, J. L. Benham and J. F. Kinstle, Eds., ACS Symposium Series No. 364, Chap. 19, p. 258 (1988).
26. S. D. Smith, G. York, D. W. Dwight, and J. E. McGrath, "Styrenic and Acrylic-Siloxane Block and Graft Copolymers," in Chemical Reactions in Polymers, J. L. Benham and J. F. Kinstle, Eds., ACS Symposium Series No. 364, Chap. 7, 85-96 (1988).
27. I. Yilgor and J. E. McGrath, "Polysiloxane Containing Copolymers: A Survey of Recent Developments," in Advances in Polymer Science, R. Stumpe, Editor, Springer-Verlag GmbH & Co. KG, Vol. 88, 1-86, February 1988.
28. J. E. McGrath, G. L. Wilkes, T. C. Ward, A. D. Broske, B. Lee, I. Yilgor, D. J. Bradley, J. M. Hoover, and T. E. Long, "New Elastomer Synthesis for High Performance Applications," Plastics and Elastomers, (1988). ISBN-0-8155-1156-6.
29. D. A. Lewis, J. H. O'Donnell, J. L. Hedrick, T. C. Ward, and J. E. McGrath, "Radiation Resistant, Amorphous, All-Aromatic Poly(arylene ether sulfones)," in The Effects of Radiation of High Technology Polymers, E. Reichmanis and J. H. O'Donnell, Eds., ACS Symposium Series, No. 381, 252-261 (1989).
30. C. A. Arnold, J. D. Summers, Y. P. Chen, T. H. Yoon, J. E. McGrath, D. Chen, and J. E. McGrath, "Soluble Polyimide Homopolymers and Poly(Siloxane Imide) Segmented Copolymers with Improved Dielectric Behavior," Polyimides: Materials, Chemistry and Characterization, C. Feger, M. M. Khojasteh, and J. E. McGrath, Eds., Elsevier, Amsterdam, (1989).
31. G. Lyle, J. C. Hedrick, D. A. Lewis, J. S. Senger, D. H. Chen, S. D. Wu, and J. E. McGrath, "Synthesis and Characterization of Maleimide Terminated Poly(Arylene Ether Ketone)s," in Polyimides: Materials, Chemistry, and Characterization, C. Feger, M. M. Khojasteh, and J. E. McGrath, Eds., Elsevier Science Publishers, B. V., Amsterdam, , p. 213-227,(1989).
32. J. E. McGrath, J. M. DeSimone, A. M. Hellstern, J. M. Hoover, A. D. Broske, T. E. Long, S. D. Smith, C. Cho, Y. Yoo, P. Wood, C. D. DePorter, and J. S. Riffle, "Advances in Heterophase Copolymer Synthesis via Living Polymerizations," in Multiphase Macromolecular Systems, B. M. Culbertson, Ed., Plenum Press, 213-226, (1989).
33. D. W. Dwight, J. E. McGrath, G. Lawson, N. M. Patel, and G. A. York, "Surface and Bulk Microphase Separation in Siloxane-Containing Block Copolymers and Their Blends: The Roles of Composition and Kinetics," in Multiphase Macromolecular Systems, B. M. Culberton, Ed., Plenum Publishing Company, New York, 265-288, (1989).

| back to top |

1990-1999

1. C. S. Elsbernd, M. Spinu, V. J. Krukonis, P. M. Gallagher, D. K. Mohanty, and J. E. McGrath, "Synthesis and Fractionation Studies of Functionalized Organosiloxanes," in Silicon-Based Polymer Science: A Comprehensive Resource, J. M. Ziegler and F. W. Gordon Fearon, Eds., ACS Advances in Chemistry Series No. 224, pp. 145-164, (1990).
2. H. Kim, A. M. El-Naggar, G. L. Wilkes, Y. Yoo, and J. E. McGrath, "Structure-Property Behavior of Caprolactone-Allyl Glycidyl Ether Copolymers Crosslinked by Electron Beam Irradiation," ACS Books, Symposium Series No. 417, Chapter 33, Radiation Curing of Polymeric Materials, C. E. Hoyle and J. F. Kinstle, Eds., (1990).
3. D.J.T. Hill, D.A. Lewis, J.H. O?Donnell, P.J. Pomery, J.L. Hedrick, and J.E. McGrath, "Radiation Resistance and Molecular Structure of Poly(arylene ether sulfone)s," Polymers for Advanced Technologies, Volume 2, pp. 15-20, John Wiley & Sons, Ltd. (1991).
4. C. A. Arnold, P. M. Hergenrother, and J. E. McGrath, "An Overview of Organic Polymeric Matrix Resins for Composites," Composites: Chemical and Physicochemical Aspects, T. L. Vigo and B. J. Kinzig, Eds., VCH pp 3-30, (1992).
5. J.E. McGrath, "Polymers, Synthesis," Encyclopedia of Physical Science and Technology, Volume 13, Academic Press, Inc., (1992).
6. J.C. Hedrick, N.M. Patel, J.E. McGrath, "Toughening of Epoxy Resin Networks with Functionalized Engineering Thermoplastics," K. Riew, Editor, Rubber Toughened Plastics, American Chemical Society, 1993.
7. I. Y. Wan, J. E. McGrath and T. Kashiwagi, "Triarylphosphine Oxide Containing Nylon 6,6 Copolymers," ACS Symposium Series No. 599, Fire and Polymers II: Materials and Tests for Hazard Prevention, ed. G. L. Nelson, p. 29-40, (1994).
8. D. M. Knauss, J. E. McGrath, "Copolycarbonates and Poly(arylates) Derived from Hydrolytically Stable Phosphine Oxide Comonomers," ACS Symposium Series No. 599, Fire and Polymers II: Materials and Tests for Hazaerd Prevention, ed. G. L. Nelson, p. 41-55 (1994).
9. D. M. Knauss, J. E. McGrath, and T. Kashiwagi, "Copolycarbonates and Poly(Arylates) Derived from Hydrolytically Stable Phosphie Oxide Comonomers," ACS Symposium Series 599, "Fire and Polymers," ed. Gordon Nelson, Washington, D. C., (1995), 40-55.
10. G.W. Meyer, S. J. Pak, Y.J. Lee and J.E. McGrath "Novel High-Performance Thermosetting Polymer Matrix Material Systems," ACS Symposium Series 603, High-Temperature Properties and Applications of Polymeric Materials, eds. M.R. Tant, J.W. Connell, H.L.N. McManus, Washington, D. C., (1995), 168-184.
11. H. Ghassemi, H.K. Shobha, M. Sankarapandian, A. Shultz, C.L. Sensenich, J.S. Riffle, J.J. Lesko, J.E. McGrath and U. Sorathia, "Volatile-Free Phenolic Networks for Infrastructure," Second International Conference on Composites in Infrastructure, H. Saadatmanesh and M.R. Ehsani, Editors, Tusco, AZ, pp 46-56 (1998).

| back to top |

2000 - present

1. M. Hickner, Y.S. Kim, F. Wang, T.A. Zawodzinski, and J.E. McGrath, "Proton Exchange Membrane Nanocomposites," Proceedings, American Society for Composites, 16th Annual Technical Conference, Virginia Tech, September 9-12, 2001.
2. T.E. Long, J.E. McGrath and S. Richard Turner, Polymer, Synthesis from Encyclopedia of Physical Science and Technology, Third Edition, Volume 12, Academic Press (2002).
3. S. Wang and J. McGrath “Synthesis of Poly(arylene ether)s,” in Synthetic Methods in Step-Growth Polymers, T.E. Long and M. Rogers (Eds), pp. 327-374, John Wiley and Sons, NY, (2003).
4. M.A. Hickner, H. Ghassemi, Y.S. Kim, B. Einsla and J.E. McGrath, “Alternative Polymer Systems for Proton Exchange Membranes,” Chemical Reviews (2004), 104(10), 4587-4611.

| back to top |

1. J. Lal and J. E. McGrath, "Effect of Sulfur on the Radiation Cross-Linking of Ethylene-Propylene Rubber and Poly(vinyl ethyl ether)," Rubber Chemistry and Tech., 36, 248-258 (1963).
2. J. Lal and J. E. McGrath, "Vulcanization of Poly-(Vinyl Alkyl Ethers) with Dicumyl Peroxide and Sulfur," Rubber Chemistry and Tech., 36, 1159-1172 (1963).
3. J. Lal and J. E. McGrath, "Stereoregular Polymerization of Vinyl Alkyl Ethers with Metal Sulfate-Sulfuric Acid Complex," J. Polymer Sci., A2, 3369-3378 (1964).
4. A. N. Gent and J. E. McGrath, "Effect of Temperature on the Ozone Cracking of Rubbers," J. Polymer Sci., A3, 1473-1482 (1965).
5. J. Lal, J. E. McGrath, and K. W. Scott, "Dynamic Mechanical Properties of Poly(Vinyl Alkyl Ethers)," J. Applied Polymer Sci., 9, 3471-3485 (1965).
6. J. Lal, J. E. McGrath, and G. S. Trick, "Effect of Temperature and Solvents on the Stereoregular Polymerization of Vinyl Alkyl Ethers," J. Polymer Sci., A-l, 5, 795-801 (1967).
7. J. Lal and J. E. McGrath, "Effect of Polymer Structure on Cross-Linking Efficiency and Molecular Chain Scission/Crosslinking Ratio in a Dicumyl Peroxide Sulfur Vulcanizing System," J Polymer Sci., Part C, 16, 33-41 (1967).
8. J. Lal, J. E. McGrath, and R. D. Board, "Effect of Polymer Structure on Ease of Hydrogen Abstraction by Cumyloxy Radicals," J. Polymer Sci., A-l, 6, 821-828 (1968).
9. M. Morton, J. E. McGrath, and P. C. Juliano, "Structure-Property Relationships for Styrene-Diene Thermoplastic Elastomers," J. Polymer Sci., Part C, No. 26, 99-115 (1969).

| back to top |

1970 - 1979

1. M. Matzner, L. M. Robeson, R. J. Greff, and J. E. McGrath, "Anionic Polymerization of e-Caprolactam with Activated Aromatic Halides," Angewandte Makromolekulare Chemie, 26, 137-144 (1972).
2. M. Matzner, D. L. Schober, and J. E. McGrath, "Styrene-Nylon 6 Graft Copolymers," European Polymer Journal, 9, 469 (1973).
3. M. Matzner, et al. (6 authors), "Block Copolymer Elastomers from Polysiloxanes and High Temperature Resistant Segments," Appl. Polymer Symposia, No. 22, 143-156 (1973).
4. M. Matzner, J. E. McGrath, S. W. Chow, J. V. Koleske, L. M. Robeson, "Anionic Polymerization of e-Caprolactam. I. Initiation by Thiocaprolactone," J. Appl. Polym. Sci., 17, 938-941 (1973).
5. M. Matzner, A. Noshay, D. L. Schober, and J. E. McGrath, "Block and Graft Copolymers," Ind. Chim. Belg. 38, 1104-1118 (1973).
6. A.G. Farnham, L.M. Robeson and J.E. McGrath, J. Appl. Polym. Sci., Symp. 26, 373 (1975).
7. J. E. McGrath, "Structure-Property Relationships in Block Copolymers," Adv. In Engineering Science, 1, 37-46 (1976).
8. J. E. McGrath, M. Matzner, L. M. Robeson, and R. Barclay, Jr., "Homogeneous and Microheterogeneous Block Copolymers," J. Polymer Science, Polymer Symposium, 60, 29-46 (1977).
9. J. E. McGrath, T. C. Ward, E. Shchori, and A. J. Wnuk, "Polycarbonate-Polysulfone Block Copolymers," Polymer Engineering and Science, 17(8), 647-652 (1977).
10. L. M. Robeson and J. E. McGrath, "Miscibility of Poly(Vinyl Chloride) with Ethylene-Ethyl Acrylate-Carbon Monoxide Terpolymers," Polymer Engineering and Science, 17(5), 300-304 (1977).
11. M. Matzner, A. Noshay, and J. E. McGrath, "Effect of Hard Segment Chemical Structure on the Processibility of Organo-Siloxane Block Copolymers," Trans. Soc. Rheology, 21/22, 273-290 (1977).
12. E. Shchori and J. E. McGrath, "A Facile Spectrophotometric Analysis of Phenolic Terminal Functionality in Polymers," Appl. Poly. Symp., No. 34, 103-117 (1978).
13. A. J. Wnuk, T. F. Davidson, and J. E. McGrath, "Potentiometric Titrations of Phenolic Functionality in Monomers and Macromolecules," Appl. Polym. Symp., No. 34, 89-101 (1978).
14. D. W. Dwight, J. E. McGrath, and J. P. Wightman, "ESCA Studies of Polymer Structure and Bonding. II," Appl. Poly. Symp., No. 34, 35-47 (1978).
15. T. C. Ward, A. J. Wnuk, E. Shchori, R. Viswananthan, and J. E. McGrath, "Poly(Aryl Ether)-Poly(Aryl Carbonate) Block Copolymers," ACS Adv. Chem. Series, S. L. Cooper, Ed., "Multiphase Polymer Systems," 293-311 (1979).

| back to top |

1980-1989

1. S. Tang, E. Meincke, J. S. Riffle, and J. E. McGrath, "Polycarbonate-Polysiloxane Block Copolymers," Rubber Chem. and Tech., 54(5), 1160 (1980).
2. J. E. McGrath, "Chain Reaction Polymerization," J. Chem. Education, 58, 844-861 (1981).
3. J. E. McGrath, "Block and Graft Copolymers," J. Chem. Education, 58, 914-921 (1981).
4. I. C. Wang, Y. Mohajer, T. C. Ward, G. L. Wilkes, and J. E. McGrath, "Anionic Copolymerization of Butadiene and Isoprene with Organolithium Initiators in Hexane," ACS Symposium Series, J. E. McGrath, Ed., "Anionic Polymerization: Kinetics, Mechanisms, and Synthesis," No. 166, 529-555 (1981).
5. M. K. Martin, T. C. Ward, and J. E. McGrath, "The Reactivity of Polydiene Anions with Divinylbenzene," ACS Symposium Series, J. E. McGrath, Ed., "Anionic Polymerization: Kinetics, Mechanisms, and Synthesis," No. 166, 557-580 (1981).
6. A. K. Banthia, D. Lunsford, D. C. Webster, and J. E. McGrath, "Interfacial Synthesis Part 1: Phase-Transfer Catalyzed Synthesis of Polyhydroxy Ether," J. Macromol. Sci.-Chem., A15(5), 943-966 (1981).
7. J. S. Riffle, R. G. Freelin, A. K. Banthia, and J. E. McGrath, "Interfacial Synthesis, Part II: Phase-Transfer Catalyzed Synthesis of Polycarbonate/Polysiloxane Block Copolymers," J. Macromol. Sci.-Chem., A15(5), 967-998 (1981).
8. D. R. Lloyd, L. E. Gerlowski, C. D. Sunderland, J. P. Wightman, J. E. McGrath, M. Igbal, and Y. Kang, "Poly(Aryl Ether) Membranes for Reverse Osmosis," ACS Symposium Series, A. F. Turbak, Ed., No. 153, 327-350 (1981).
9. I. Yilgor, E. Yilgor, A. K. Banthia, G. L. Wilkes, and J. E. McGrath, "A DSC Kinetic Study of the Epoxy Network System Bisphenol-A diglycidylether-Bis(4-Aminocyclohexyl)Methane," Polymer Bulletin, 4, 323-327 (1981).
10. Y. Mohajer, G. L. Wilkes, and J. E. McGrath, "Influence of Tacticity and Sorbed Water on the Material Properties of Poly(N,N'-Dimethylacrylamide)," J. of Polym. Appl. Sci., 26, 2827-2839 (1981).
11. A. J. Wnuk, T. C. Ward, and J. E. McGrath, "Design and Application of an Instrumented Falling Weight Impact Tester," Polymer Engineering and Science, 21, No. 6, 313-324 (1981).
12. E. S. W. Kong, G. L. Wilkes, J. E. McGrath, A. K. Banthia, Y. Mohajer, and M. R. Tant, "Physical Aging of Linear and Network Epoxy Resins," Polymer Eng. and Sci., 21(14), 943-951 (1981).
13. T. C. Ward, D. P. Sheehy, J. S. Riffle, and J. E. McGrath, "Inverse Gas Chromatography of Polycarbonate-Polydimethyl Siloxane Block Copolymers," Macromolecules, 14(6), 1791-1797 (1981).
14. Y. Mohajer, G. L. Wilkes, I. C. Wang, and J. E. McGrath, "Hydrogenated Linear Block Copolymers of Butadiene and Isoprene: Effects of Variation in Composition and Sequence Architecture on Properties," Polymer (London), 23(10), 1523-1536 (1982).
15. S. Abouzahr, Y. Mohajer, G. L. Wilkes, and J. E. McGrath, "Chemorheology of Butadiene-Isoprene Block Copolymer Networks," Polymer (London), 23(10), 1519-1523 (1982).
16. J. S. Riffle, E. Shchori, G. Freelin, T. C. Ward, and J. E. McGrath, "Synthesis of Hydroxyl Terminated Polycarbonates of Controlled Molecular Weight," J. Polymer Sci. (Chemistry Edition), 20, 2289-2301 (1982).
17. Y. Mohajer, I. C. Wang, G. L. Wilkes, and J. E. McGrath, "Hydrogenated Linear Block Copolymers of Butadiene and Isoprene: Dynamic Mechanical Behavior," in "Elastomers and Rubber Elasticity," J. Lal and J. E. Mark, Eds., Polymer Symposium Volume Series, p. 120-154 (1982).
18. J. E. McGrath, M. Matzner, L. M. Robeson, and E. Wise, "EthyleneN,N-Dimethylacrylamide Copolymers and Their Blends with PVC," Makromol Chemie, 183, 2871-2879 (1982).
19. I. Yilgor, J. S. Riffle, G. L. Wilkes, and J. E. McGrath, "Siloxane-Urea Segmented Copolymers. I. Syntheses and Characterization of Model Polymers for MDI and a, 1 Bis(Aminopropyl) Polydimethyl Siloxane," Polymer Bulletin, 8, 535-542 (1982).
20. D. Tyagi, I. Yilgor, G. L. Wilkes, and J. E. McGrath, "SiloxaneUrea Segmented Copolymers. II. Mechanical Behavior," Polymer Bulletin, 8, 543-550 (1982).
21. Y. Mohajer, E. Yorkgitis, G. L. Wilkes, and J. E. McGrath, "Physical Aging Studies of Epoxy Resins with Emphasis on Graphite Fiber-Epoxy Composites," in Proceedings of the Critical Review, Techniques for the Characterization of Composite Materials, Army Materials, and Mechanics Research Center, Watertown, MA, p. 339-370, May (1982).
22. D. C. Webster and J. E. McGrath, "Poly(aryl ether)-poly(arylate) Block Copolymers. I. Polysulfone-Bis A Terephthalate Systems," in Contemporary Topics in Polymer Science, Vol. 4, W. J. Bailey, Ed. (1983).
23. D. J. T. Hill, J. H. O'Donnell, P. W. O'Sullivan, J. E. McGrath, I. C. Wang, and T. C. Ward "Anionic Copolymerization of Butadiene and Isoprene: Applicability of the Terminal Model to High Conversion," Polymer Bulletin, 9(6/7), 292-298 (1983).
24. J. E. McGrath, J. S. Riffle, I. Yilgor, A. K. Banthia, and G. L. Wilkes, "An Overview of the Polymerization of Cyclosiloxanes," Initiation of Polymerization, ACS Symposium Series, No. 212, 145-173 (1983).
25. J. S. Riffle, I. Yilgor, A. K. Banthia, G. L. Wilkes, and J. E. McGrath, "Siloxane Modified Epoxy Resins II," Epoxy Resins, R. Bauer, Ed., ACS Symposium Series, No. 221, 21-55 (1983).
26. M. Iskandar, C. Tran, L. M. Robeson, and J. E. McGrath, "Fourier Transform Infrared Studies of Poly(Vinyl Chloride) Blends with Ethylene Co -and Terpolymers," Polym. Eng. Sci., 23(12), August (1983).
27. I. Yilgor, E. Yilgor, A. K. Banthia, G. L. Wilkes, and J. E. McGrath, "Synthesis and Characterization of Free Radical Cured Bis-Methacryloxy Bisphenol-A Epoxy Networks," Polymer Composites, April, Vol. 4, No. 2, p. 120-125 (1983).
28. K. E. Kinzer, D. R. Lloyd, J. P. Wightman, and J. E.McGrath, "Asymmetric Membrane Preparation from Nonsolvent Casting Systems," Desalination, 46, 327-334 (1983).
29. K. W. Anderson, L. J. Mathias, and J. E. McGrath, "Comments on 'Synthesis of Hydroxyl-Terminated Polycarbonates of Controlled Number-Average Molecular Weight'," J. Polym. Sci: Polym. Lett. Ed., Vol. 21, 445-447 (1983).
30. B. C. Johnson, I. Yilgor, C. Tran, M. Iqbal, J. P. Wightman, D. R. Lloyd, and J. E. McGrath, "Synthesis and Characterization of Sulfonated Poly(Arylene Ether Sulfones)," Journal of Polymer Science, 22, 721-737 (1984).
31. F. L. Keohan, R. G. Freelin, J. S. Riffle, I. Yilgor, and J. E. McGrath, "Synthesis of High Molecular Weight Polyester-Carbonates via Interfacial Phosgenation of Aromatic Dicarboxylic Acids and Bisphenols," Journal of Polymer Science, 22, 679-704 (1984).
32. R. Viswanathan, B. C. Johnson, and J. E. McGrath, "Synthesis, Kinetic Observations, and Characteristics of Poly(Arylene Ether Sulfones) Prepared by a Potassium Carbonate DMAC Process," Polymer, London, 25(12), 1827-1836 (1984).
33. I. Yilgor, V. Krukonis, and J. E. McGrath, "Polymer Fractionation with Supercritical Fluids. I. The Method," Polymer Bulletin, 12, 491-497 (1984).
34. I. Yilgor, V. Krukonis, and J. E. McGrath, "Polymer Fractionation with Supercritical Fluids. II. Application to Functional Polysiloxane Oligomers," Polymer Bulletin, 12, 499-506 (1984).
35. I. Yilgor, W. P. Steckle, Jr., D. Tyagi, G. L. Wilkes, and J. E. McGrath, "Segmented Organosiloxane Copolymers. I. Synthesis and Characterization of Siloxane Urea Copolymers," Polymer, London, 25(12), 1800-1806 (1984).
36. D. Tyagi, I. Yilgor, J. E. McGrath, and G. L. Wilkes, "Segmented Organosiloxane Copolymers. II. Thermal and Mechanical Properties of Siloxane Urea Copolymers," Polymer, London, 25(12), 1807-1814 (1984).
37. S. Tang, E. Meinecke, J. S. Riffle, and J. E. McGrath, "Polycarbonate-Polydimethylsiloxane Block Copolymers. II. Structure Property Studies," Rubber Chem. and Tech., 57(1), 184 (1984).
38. B.C. Johnson, J.L. Hedrick, F. Campbell, and J.E. McGrath, "Synthesis and Characterization of Poly(Arylene Ether Sulfone-Aryl Imide) Copolymers," SAMPE Proceedings (Reno, NV), 29(1), 447-458 (1984).
39. D.C. Webster, J.L. Hedrick and J.E. McGrath, "Engineering Homopolymer-Block Copolymer Blends. I. Polysulfone with Polysulfone Dimethylsiloxane Block Copolymers," SAMPE Proceedings (Reno, NV), 29(1), 1085-1094 (1984).
40. J. L. Hedrick, I. Yilgor, G. L. Wilkes, and J. E. McGrath, "Toughening of Epoxy Resins with Ductile Glassy Thermoplastics. I. Hydroxyl Functional Polysulfones," Polymer Bulletin, 13, 201-208 (1985).
41. P. M. Sormani, R. J. Minton, and J. E. McGrath, "Anionic Ringopening Polymerization of Octamethylcyclotetrasiloxane in the Presence of l,3-Bis(aminopropyl) -1,1,3,3-tetramethyldisiloxane," Ring-Opening Polymerization, ACS Symposium Series, No. 286, 147160 (1985).
42. J. E. McGrath, "Ring-Opening Polymerization: Introduction," Ring-Opening Polymerization, ACS Symposium Series, No. 286, 1-22 (1985).
43. I. Yilgor, J. Riffle, and J. E. McGrath, "Reactive Difunctional Siloxane Oligomers: Synthesis and Characterization," Reactive Oligomers, ACS Symposium Series, No. 282, 161-174 (1985).
44. I. Yilgor and J. E. McGrath, "Effect of Catalysts on the Reaction Between A Cycloaliphatic Diisocyanate (H-MDI) and n-Butanol," J. Appl. Poly. Sci., 30, 1733-1739 (1985).
45. V. P. Saraf, W. G. Glasser, G. L. Wilkes, and J. E. McGrath, "Engineering Plastics from Lignin. VI. Structure Property Relationships of PEG-Containing Polyurethane Networks," J. Appl. Poly. Sci., 30, 2207 (1985).
46. K. E. Kinzer, D. R. Lloyd, M. S. Gay, J. P. Wightman, B. C. Johnson, and J. E. McGrath, "Anisotropic Sulfonated Polysulfone Membranes," J. Mem. Sci., 22, 1-19 (1985).
47. J.L. Hedrick, I. Yilgor, J.C. Hedrick, G.L. Wilkes, and J.E. McGrath, "Chemical Modification of Matrix Resin Metworks with Engineering Thermoplastics II. Morphology and Properties of Poly (Arylene Ether Sulfone) Modified Epoxy Networks," SAMPE Proceedings (Anaheim, CA) 30 (1), 947-958 (1985).
48. P.J. Andolino Brandt, D.C. Webster, and J.E. McGrath, "Multiple Damping Materials I. Polysiloxane-Polyarylester Block Copolymers: Synthesis and Characterization," SAMPE Proceedings (Anaheim, CA) 30 (1), 959-970 (1985)
49. J. L. Hedrick, D. K. Mohanty, B. C. Johnson, R. Viswanathan, J. A. Hinkley, and J. E. McGrath, "Radiation Resistant Amorphous-All Aromatic Polyarylene Ether Sulfones: Synthesis, Characterization, and Mechanical Properties," J of Polym. Chem., Polym. Chem. Edition, 23, 287-300 (1986).
50. J. J. Dumais, A. L. Cholli, L. W. Jelinski, J. L. Hedrick, and J. E. McGrath, "Molecular Basis of the b-Transition in Poly(arylene ether sulfones)," Macromolecules, 19, 1884-1888 (1986).
51. R. C. Allen, G. L. Wilkes, I. Yilgor, S. D. Wu, and J. E. McGrath, "Synthesis and Characterization of Poly(Dimethylsiloxane) Based Liquid Crystals," Die Makromolekulare Chemie, 187, 2909-2931 (1986).
52. R. D. Allen, T. E. Long, and J. E. McGrath, "Preparation of High Purity, Anionic Polymerization Grade Alkyl Methacrylate Monomers," Polymer Bulletin, 15(2), 127-134 (1986).
53. J. E. McGrath, P. M. Sormani, C. S. Elsbernd, and S. Kilic, "Kinetics, Mechanisms and Synthesis Studies of Difunctional Aminopropyl Terminated Polydimethyl Siloxane Oligomers," Makromol. Chem., Macromol. Symp. 6, 67-80 (1986).
54. J. M. Lambert, B. E. McGrath, G. L. Wilkes, and J. E. McGrath, "Synthesis of Anisotropic-Isotropic Segmented Engineering Copolymers Based on Poly(Arylene Terephthalates) or Polyoxygenzoates and Poly(Arylene Ether Sulfones)," Polymer Materials: Science and Engineering, 55, 1-7 (1986).
55. D. Tyagi, J. E. McGrath, and G. L. Wilkes, "Small Angle X-Ray Studies of Siloxane-Urea Segmented Copolymers," Polym. Engr. & Sci., 26(20), 1371 (1986).
56. J.A. Cercere, J.L. Hedrick, and J.E. McGrath, "Morphology and Properties and Amine Terminated Poly(Arylene Ether Ketone) and Poly(Arylene Ether Sulfone) Modified Epoxy Resin Systems," SAMPE Proceedings, 31, 580-588, (1986).
57. M.J. Jurek and J.E. McGrath, "Synthesis of Diamino Terminated Poly(Arylene Ether Sulfone) Oligomers as Reactive Intermediates in Copolymer Systems, SAMPE Proceedings, 31, 913-919, (1986).
58. S.D. Wu, J.L. Hedrick, D.K. Mohanty, B.k. Carter, G.L. Wilkes and J. E. McGrath, "Synthesis and Characterization of Poly(Arylene Ether Ketone Sulfone) Copolymers, SAMPE Proceedings, 31, 933-944, (1986).
59. D.K. Mohanty, T.S. Lin, T.C. Ward, and J.E. McGrath, "Novel Synthesis of Thermoplastic Semicrystalline Poly(Arylene Ether Ketone), SAMPE Proceedings, 31, 945-955, (1986).
60. J. L. Hedrick, R. A. Patsiga, J. J. Dumais, L. W. Jelinski, and J. E. McGrath, "Synthesis and Characterization of Deuterated Poly(Arylene Ether Sulfones)," J. Polym. Sci. (Polym. Chem. Ed.), 25(8), 2289-2300 (1987).
61. R. H. Bott, J. D. Summers, C. A. Arnold, L. T. Taylor, T. C. Ward, and J. E. McGrath, "Synthesis and Characteristics of Novel Poly(Imide Siloxane) Segmented Copolymers," The Journal of Adhesion, 23, 67-82 (1987).
62. J. E. McGrath, P. M. Sormani, C. S. Elsbernd, and S. Kilic, "Linear Thermal Expansion and Extension Coefficients of Various Polyimide Films by Using a Thermomechanical Analyzer," NATAS Conference Proceedings, Washington, D.C., September 27-30, 1987.
63. D.K. Mohanty, R.C. Lowery, G.D. Lyle and J.E. McGrath, "Ketimine Modifications as a Route to Novel Amorphous and Derived Semicrystalline Poly(Arylene Ether Ketone) Homo- and Copolymers," SAMPE Proceedings, Anaheim, CA, 32, 408-419, April 6-9, 1987.
64. C.A. Arnold, J.D. Summer, R. H. Bott, L.T. Taylor, T.C. Ward and J.E. McGrath, "Structure Property of Polyimide Siloxane Segmented Copolymers," SAMPE Proceedings, Anaheim, CA, 32, 586-596, April 6-9, 1987.
65. J.D. Summer, C.A. Arnold, R.H. Bott, L.T. Taylor, T.C. Ward and J.E. McGrath, "Synthesis and Solution Imidization Studies of Soluble Poly(Imide Siloxane) Segmented Copolymers," SAMPE Proceedings, Anaheim, CA, 32, 613-623, April 6-9, 1987.
66. J.A. Cecere, J.S. Senger and J.E. McGrath, "Fabrication and Characterization of Amine Terminated Poly(Arylene Ether Sulfone) Modified Epoxy-Carbon Fiber Composites," SAMPE Proceedings, Anaheim, CA, 32, 1276-1287, April 6-9, 1987.
67. D. Tyagi, J. L. Hedrick, D. C. Webster, J. E. McGrath, and G. L. Wilkes, "Structure-Property Relationships in Perfectly Alternating Segmented Polysulfone/Polydimethylsiloxane Copolymers," Polymer, 29, pp. 833-844 (1988).
68. N. M Patel, D. W. Dwight, J. L. Hedrick, D. C. Webster, and J. E. McGrath, "Surface and Bulk Phase Separation in Block Copolymers and Their Blends. Polysulfone/Polysiloxane," Macromolecules, 21, pp. 2689-2696 (1988).
69. Chang G. Cho and James E. McGrath, "Kinetic Study of the Polymerization of Alkyl Vinyl Ethers by HI/I2 Catalyst,R J Macromol. Sci.-Chem., A25(5-7), pp. 499-514 (1988).
70. J. E. McGrath, S. Kilic, J. Pullockaran, Wm. Haines, and J. Patt, "Chemical Processing of Elastomers for High Performance Applications - I. EPDM," AIChE Proceedings, Aug. 21-23, Denver, CO, (1988).
71. J. E. McGrath, S. Kilic, J. Pullockaran, Wm. Haines, and J. Patt, "Chemical Processing of Elastomers for High Performance Applications - II. Nitrile Rubber Derivative Systems", AIChE Proceedings, Aug. 21-23, Denver, CO, (1988).
72. C. A. Arnold, R. H. Bott, T. H. Yoon, B. E. McGrath, D. Chen, and J. E. McGrath, "Polyimide Homopolymers and Poly(Siloxane Imide) Segmented Copolymers for Use as Composite Matrix Resins and Structural Adhesives," SPE Proceedings, Composites Division Meeting, Los Angeles, November 15-17, 1988.
73. C.A. Arnold, J.D. Summers, Y.P. Chen, D. H. Chen, J.D. Graybeal and J.E. McGrath, "Structure-Property Behavior of Soluble Polyimide-Polydimethylsiloxane Segmented Copolymers," SAMPE Proceedings, Anaheim, CA, 33, 960-969, March 7-10, 1988.
74. D.K. Mohanty, J.S. Senger, D.C. Smith and J.E. McGrath, "Synthesis and Physical Behavior of Ketimine Modified Poly(Arylene Ehter) Networks," SAMPE Proceedings, Anaheim, CA, 33, 970-978, March 7-10, 1988.
75. G.D Lyle, D.K. Mohanty, J.A. Cecere, S.D. Wu, J.S. Senger, D.H. Chen, S. Kilic and J.E. McGrath, "Synthesis, Curing and Physical Behavior of Maleimide Terminated Poly(Arylene Ethers)," SAMPE Proceedings, Anaheim, CA, 33, 1080-1089, March 7-10, 1988.
76. R.H. Bott, J.D. Summers, C.A. Arnold, C.P. Blankenship Jr., L.T. Taylor, T.C. Ward and J.E. McGrath, Poly(Imide-Siloxane) Segmented Copolymer Structural Adhesives Prepared by Bulk and Solution Thermal Imidization," SAMPE Proceedings, Anaheim, CA, 33, 1177-1187, March 7-10, 1988.
77. H. Kim, J. Song, G. L. Wilkes, S. D. Smith, and J. E. McGrath, "Electron Beam Effects on Polymers: II. Surface Modification of Bis-GMA Substrates by Functionalized Siloxane Oligomers," Journal of Applied Polymer Science, 38, 1515 (1989).
78. N. M. Patel, C. H. Moy, J. E. McGrath, and R. Bruce Prime, "The Cure of Epoxy and Poly(Propylene Oxide) Modified Epoxy Systems via Dynamic Mechanical Analysis and Thermogravimetric Analysis," 18th NATAS Conference, San Diego, p. 232 (1989).
79. J. A. McGrath, N. Patel, D. Wu, D. Mohanty, G. D. Lyle, J. Senger, J. C. Hedrick, and D. Chen, "Thermal Characterization of Toughened Maleimide, Nadimide, and Epoxy Networks," 18th NATAS Conference, San Diego, p. 231 (1989).
80. D. L. Wilkens, C. A. Arnold, M. J. Jurek, M. E. Rogers, and J. E. McGrath, "Polysulfone Modified Thermoplastic Polyimide Segmented Copolymer Matrix Resin Systems," 4th Technical Conference, American Society of Composites, pp. 638-646, Blacksburg, VA, (1989).
81. J. C. Hedrick, D. A. Lewis, G. D. Lyle, T. C. Ward, and J. E. McGrath, "Electromagnetic (Microwave) Processing of High Performance Polymeric Matrix Resins for Composite Structures," 4th Technical Conference, American Society of Composites, p. 167, Blacksburg, VA, (1989).
82. J. S. Senger, G. York, D. Chen, K. Ung, and J. E. McGrath, "The New Matrix Systems I: Blended Composite Materials Comprising Simple Bismaleimide and Maleimide Functional Poly(Arylene Ether) Ketone Thermoplastic Modifiers," 4th Technical Conference, American Society of Composites, pp. 631-637, Blacksburg VA, (1989).
83. J. E. McGrath, "Advances in Heterophase Copolymer Synthesis," T. Saegusa, Ed., IUPAC Frontiers of Macromolecular Science, 195-200 (1989).
84. J. S. Senger, I. Yilgor, R. Patsiga, and J. E. McGrath, "Isocyanate-Epoxy Reactions in Bulk and Solution," Journal of Applied Polymer Science, 38, 373-382 (1989).
85. M. Spinu, A. Brennan, J. Rancourt, G. L. Wilkes, and J. E. McGrath, "Synthesis of Polyimide-Silicate Hybrids Via Sol-Gel Ultrastructure Processing," MRS Fall Proceedings, Boston, MA, 000 (1989).
86. M. Spinu and J. E. McGrath, "Modification of Silicate Ceramics by Incorporation of Organic Polymers via Controlled Pressure Sol-Gel Ultrastructure Processing," Materials Research Society (MRS) Proceedings, San Diego, CA, 211, (1989).
87. T. H. Yoon, C. A. Arnold, and J. E. McGrath, "Titanium 6/4 Single Lap Shear Adhesive Performance of Polyimide Homopolymers and Poly(Siloxane Imide) Segmented Copolymers," Materials Research Society (MRS) Proceedings, San Diego, CA, (1989).
88. C. A. Arnold, Y. P. Chen, D. H. Chen, and J. E. McGrath, "Space Compatible Poly(Siloxane Imide) Segmented Copolymers and Polyblends," Materials Research Society (MRS) Proceedings, San Diego, CA, published (1989).
89. C. A. Arnold, Y. P. Chen, D. H. Chen, and J. E. McGrath, "Low Dielectric, Hydrophobic Polyimide Homopolymers, and Poly(Siloxane Imide) Segmented Copolymers for Electronic Applications," MRS Proc., 154, 149 (1989).
90. C. A. Arnold, J. D. Summers, and J. E. McGrath, "Synthesis and Physical Behavior of Siloxane Modified Polyimides," Polymer Engineering and Science, 29 (20), 1413-1418 (1989).
91. J. M. DeSimone, A. M. Hellstern, T. C. Ward, J. E. McGrath, S. D. Smith, P. M. Gallagher, V. J. Krukonis, J. Stejskal, D. Strakova, and P. Kratochvil, "Synthesis, Characterization, and Chemical Composition Distribution Investigations of Graft Copolymers Prepared by the Macromononer Technique," in Multiphase Macromolecular Systems, B. M. Culbertson, Ed., Plenum Press, 1989, 227-241.
92. C. A. Arnold, J. D. Summers, Y. P. Chen, T. H. Yoon, B. E. McGrath, D. Chen, J. D. Graybeal, and J. E. McGrath, "Soluble Polyimide Homopolymers and Poly(siloxane imide) Segmented Copolymers with Improved Dielectric Behavior," in Polyimides, C. Feger, M. M. Khojasteh, and J. E. McGrath, Eds., Elsevier, 1989, p. 69.
93. T. E. Long, A. D. Broske, D. J. Bradley, and J. E. McGrath, "Synthesis and Characterization of Poly(t-Butyl Methacrylate-b-Isoprene-b-t-Butyl Methacrylate) Block Copolymers by Anionic Techniques," J. Poly. Sci., Part A: Poly. Chem., 27 (12), 4001-4012 (1989).
94. J. Stejskal, D. Strakova, P. Kratochvil, S. D. Smith, and J. E. McGrath, "Chemical Composition Distribution of a Graft Copolymer Prepared from Macromonomer: Fractionation in Demixing Solvents," Macromolecules, 22, 861 (1989).
95. C. A. Arnold, T-H. Yoon, M. E. Rogers, and J. E. McGrath, "Synthesis and Structure-Property Behavior of Polyimide Homopolymers and Poly(Siloxane Imide) Segmented Copolymers for Use as Composite Matrix Resins and Structural Adhesives," ANTEC SPE (New York), 000 (1989).
96. S.D. Wu, J.S. Senger, J.C. Hedrick, G.D. Lyle, D.H. Chen, M. Chen, J.D. Rancourt and J.E. McGrath, "Synthesis, Curing and Physical Behavior of Maleimide and Nadimide Terminated Poly(Arylene Ether Ketone) Networks," SAMPE Proceedings, 34 (1), 139-149, Reno, NV, May 8-11, 1989.
97. D.H. Chen, Y.P. Chen, C.A. Arnold, J.C. Hedrick, J.D. Graybeal and J.E. McGrath, "Compatible Blends of Segmented Polyimide Siloxane Copolymers with Engineering Thermoplastics I. Polybenzimidazole (PBI)," SAMPE Proceedings, 34 (1), 1247-1254, Reno, NV, May 8-11, 1989.
98. C.A. Arnold, M.E. Rogers, C.D. Smith, G.D. Lyle, G.A. York, M.J. Jurek and J.E. McGrath, "Soluble, Thermoplastic Polyimide Homopolymers and Copolymers," SAMPE Proceedings, 34 (1), 1255-1264, Reno, NV, May 8-11, 1989.
99. N.M. Patel, Y.T. Yoo, S. Kilic, C. H. Moy, R.B. Prime and J.E. McGrath, "Microporosity in Thin Polymer Films," SAMPE Proceedings, 34 (2), 1745-1756, Reno, NV, May 8-11, 1989.
100. C.A. Arnold, Y.P. Chen, M.E. Rogers, J.D. Graybeal and J.E. McGrath, "Soluble Polyimide Homopolymers and Poly(Siloxane Imide) Segmented Copolymers of Improved Dielectric Behavior," SAMPE Electronic Materials and Processes Proceedings, 3, 198-208, Los Angeles, CA, June 20-22, 1989.
101. J.M. DeSimone, G.A. York, G.R. Wilson, A.M. Hellstern, S.D. Smith and J.E. McGrath, "Synthesis and Characterization of Poly(1-Butene Sulfone)-g-Poly(Dimethylsiloxane): A New Electron-Beam Resist for Two-Layer Lithography," SAMPE Electronic Materials and Processes Proceedings, 3, 872-883, Los Angeles, CA, June 20-22, 1989.
102. E.S. Moyer, D.K. Mohanty, J. Shaw, and J.E. McGrath, "Synthesis and Characterization of Soluble Photoimageable Polyimide and Poly(Imide Siloxane) Homo- and Copolymers," SAMPE Electronic Materials and Processes Proceedings, 3, 894-904, Los Angeles, CA, June 20-22, 1989.
103. M. J. Jurek and J. E. McGrath, "Synthesis and Characterization of Amine Terminated Poly(Arylene Ether Sulphone) Oligomers, Polymer (London), 30, 1552-1557 (1989).
104. G. D. Lyle, J. S. Senger, D. H. Chen, S. Kilic, S. D. Wu, D. K. Mohanty, and J. E. McGrath, "Synthesis, Curing and Physical Behavior of Maleimide Terminated Poly(ether ketones)," Polymer (London), 30, 978 (1989).
105. C. A. Arnold, J. D. Summers, Y. P. Chen, R. H. Bott, D. Chen, and J. E. McGrath, "Structure-Property Behavior of Soluble Polyimide-Polydimethylsiloxane Segmented Copolymers," Polymer (London), 30, 986 (1989).
106. D. Feng, B. Lee, G. L. Wilkes, and J. E. McGrath, "Structure-Property Behavior of Segmented Polytetramethylene Oxide (PTMO) Based Bipyridinium Ionene Elastomers," J. Applied Polymer Science, 37, 1549, 1989.

| back to top |

1990 - 1999

1. J. M. DeSimone, A. M. Hellstern, E. J. Siochi, S. D. Smith, T. C. Ward, P. M. Gallagher, V. J. Krukonis, and J. E. McGrath, "Homogeneous and Multiphase Poly(Methyl Methacrylate) Graft Polymers Via the Macromonomer Method," Die Makromol. Chem., Macromol. Symp., 32, 21-45 (1990).
2. J. E. McGrath, K. L. Cooper, W. Waehamad, H. Huang, and G. L. Wilkes, "Synthesis of Segmented Anisotropic-Isotropic Poly(Aryl Ester)Poly(Arylene Ether) Copolymers," MRS, Boston, MA, 175, 351-361 (1990).
3. P. J. Andolino Brandt, C. L. Senger Elsbernd, G. A. York, N. M. Patel, and J. E. McGrath, "Synthesis and Characterization of Perfectly Alternating Polyorganosiloxane-Polyarylester and -Poly(Aryl Formal) Block Copolymers," Polymer (London), 31, 180-190 (1990).
4. J. M. DeSimone, A. M. Hellstern, E. J. Siochi, S. D. Smith, T. C. Ward, P. M. Gallagher, V. J. Krukonis, and J. E. McGrath, "Homogeneous and Multiphase Poly(Methyl Methacrylate) Graft Polymers via the Macromonomer Method" Makromol. Chem., Macromol. Symp., 32, 21-45 (1990).
5. J. M. S. Lee, G. L. Wilkes, D. K. Mohanty, and J. E. McGrath, "The Preparation and Characterization of New Polyether KetoneTetraethylorthosilicate Hybrid Glasses by the Sol-Gel Method," Journal of Applied Polymer Science, Wiley, Vol. 40, 1177-1194 (1990).
6. D. W. Dwight, J. E. McGrath, J. S. Riffle, S. D. Smith, and G. A. York, "ADXPS/STEM Studies of Surface and Bulk Microphase Behavior in Block- and Graft-Copolymers and Their Blends," Journal of Electron Spectroscopy and Related Phenomena, 52, 457-473 (1990).
7. C. A. Arnold, D. H. Chen, Y. P. Chen, R. 0. Waldbauer, M. E. Rogers, and J. E. McGrath, "Miscible Blends of Poly(Siloxane Imide) Segmented Copolymers and Polybenzimidazole as Potential High Performance Aerospace Materials," High Performance Polymers, 2 (2), 83-94 (1990).
8. E. J. Siochi, J. M. DeSimone, A. M. Hellstern, J. E. McGrath, and T. C. Ward, "Dilute Solution Properties of Model PMMA-gPMMA's" Macromolecules, 23, 4696 (1990).
9. A. Verma, A. Nielsen, J. E. McGrath, and J. S. Riffle, "Preparation of Ester Terminated Poly(Alkyl Vinyl Ether) Oligomers and Block Copolymers Using a Combination of Living Cationic and Group Transfer Polymerization," Polymer Bulletin, 23, 563-570 (1990).
10. D. L. Wilkens, C. A. Arnold, M. J. Jurek, M. E. Rogers, and J. E. McGrath, "Polysulfone Modfied Thermoplastic Polyimide Segmented Copolymer Matrix Resin Systems," J. Thermoplastic Comp. Mat., 3 , 4-12, (1990).
11. J.C. Hedrick, C.A. Arnold, M.A. Zumbrum, T.C. Ward and J.E. McGrath, "Poly(Arylene Ether Ketone)/Poly(Aryl Imide) Homo- and Polydimethylsiloxane Segmented Copolymer Blends: Influence of Chemical Structure on Miscibility and Physical Property Behavior," SAMPE Proceedings, Anaheim, CA, 35(1), 82-96, April 2-5, 1990.
12. R. O. Waldbauer, M.E. Rogers, C.A. Arnold, G.A. York, and J.E. McGrath, "Synthesis of Soluble, Melt Processible Polyimides of Controlled Structure," SAMPE Proceedings, Anaheim, CA, 35(1), 97-107, April 2-5, 1990.
13. C.D. Smith, D.K. Mohanty and J.E. McGrath, "Synthesis and Characterization of Poly(Arylene Ether Phosphine Oxide)s," SAMPE Proceedings, Anaheim, CA, 35(1), 108-122, April 2-5, 1990.
14. G.A. York, R.O. Waldbauer, C.A. Arnold, M.E. Rogers, A. Gungor, D. Rodrigues, G.L. Wilkes and J.E. McGrath, "Investigation of the Morphological Structure and Physical Behavior of High Tg Polyimide Thermoplastic Homopolymers and Siloxane Segmented Copolymers," SAMPE Proceedings, Anaheim, CA, 35(1), 579-589, April 2-5, 1990.
15. T.H. Yoon, C.A. Arnold and J.E. McGrath, "Effect of Molecular Weight and End Group Control on the Adhesion Behavior of Thermoplastic Polyimides and Poly(Imide Siloxane) Segmented Copolymers," SAMPE Proceedings, Anaheim, CA, 35(2), 1892-1904, April 2-5, 1990.
16. J. E. McGrath, J. C. Hedrick, S. Liptak, T. C. Ward, and D. A. Lewis, "Electromagnetic Processing of Polymers: I. Basic Concepts and Molecular Design of the Macromolecules," MRS, 189, 421-430 (1991).
17. J. L. Hedrick, I. Yilgor, M. Jurek, J. C. Hedrick, G. L. Wilkes, and J. E. McGrath, "Chemical Modification of Matrix Resin Networks with Engineering Thermoplastics: I. Synthesis, Morphology, Physical Behaviour and Toughening Mechanisms of Poly(arylene ether sulphone) Modified Eoxy Networks," Polymer (London), 32 (11), 2020-2032 (1991).
18. B. E. Lindfors, R. S. Mani, J. E. McGrath, and D. K. Mohanty, "Heterogeneous Hydrolysis of Poly(Aryl Ether Ketimine)s-an Alternative Synthetic Route to Semicrystalline Poly(Aryl Ether Ketone)s," Makromolekulare Chemie, 12, 337-345 (1991).
19. B. Wang, G. L. Wilkes, J. C. Hedrick, S. C. Liptak, and J. E. McGrath, "New High Refractive Index Organic/Inorganic Hybrid Materials from Sol-Gel Processing," Macromolecules, 24, 3449-3450 (1991).
20. A. S. Gozdz, M. J. Bowden, J. M. DeSimone, G. A. York, and J. E. McGrath, "Synthesis, Bulk, Surface, and Microlithographic Characterization of Poly(1-Butene Sulfone)-G-Poly(Dimethylsiloxane)," Macromolecules, 24 (19), 5330-5339 (1991).
21. Y. Yoo and J. E. McGrath, "Synthesis of Primary Hydroxyl Functional Poly(Propylene Oxide) of Controlled Molecular Weight by Direct Polymerization," Makromol. Chem., Macromol. Symp. 42/43, 387-394 (1991).
22. D. J. T. Hill, D. A. Lewis, J. H. O'Donnell, P. J. Pomery, J. L. Hedrick, and J. E. McGrath, "Radiation Resistance and Molecular Structure of Poly(arylene ether sulfone)s" Polymers for Advanced Technologies, Vol. 2, 15-20, (1991).
23. M. A. Zumbrum, M. Chen, J. C. Hedrick, J. E. McGrath, and T. C. Ward, "Electromagnetic Processing of Polymers: II. Quantitative Investigations of Microwave Processed Thermoplastics (Microwave Calorimetry)," Microwave Processing of Materials II, MRS, 189, 431-440, (1991).
24. S. C. Liptak, S. P. Wilkinson, J. C. Hedrick, T. C. Ward, and J. E. McGrath, "Electromagnetic (Microwave) Radiation Effects on Terminally Reactive and Nonreactive Engineering Polymer Systems," in Radiation Effects on Polymers, ACS Symp. Series 475, 364-383 (1991).
25. J. E. McGrath, M. E. Rogers, C. A. Arnold, Y. J. Kim, and J. C. Hedrick, "Synthesis and Blend Behavior of High Performance Homo- and Segmented Thermoplastic Polyimide," Makromol. Chem., Macromol. Symp., 51, 103-125 (1991).
26. M. Spinu and J. E. McGrath, "Synthesis of Poly(Dimethylsiloxane) Oligomers with Pendant Amine Groups via Co-Equilibration Anionic Polymerization Reactions," Journal of Polymer Science Part A: Polymer Chemistry, Wiley, 29, 657-670 (1991).
27. T. H. Yoon and J. E. McGrath, "Effect of Surface Preparation and Thermoplastic Adhesive Structure on the Adhesion Behavior of PEEK®/Graphite Composites," MRS 190, 137-142 (1991).
28. J. E. McGrath, "Synthetic Importance and Industrial Applications of Ring-Opening Polymerization," 6th International Symposium on Ring-Opening and Cyclopolymerization, Makromolecular Chemie, Macromolecular Symp., 42/43, 69-91, (1991).
29. G. Sinai-Zingde, A. Verma, Q. Liu, A. Brink, J. Bronk, D. Allison, A. Goforth, N. Patel, H. Marand, J. E. McGrath, and J. S. Riffle, "Polyoxazoline Containing Copolymers Useful as Emulsifiers for Polymer Blends," Die Makromolekulare Chemie, Macromol. Symp., 42/42, 329-343 (1991).
30. J. M. DeSimone, M. Stangle, J. S. Riffle, and J. E. McGrath, "Aluminum-27 NMR Studies of Aluminum Porphyrins," Makromol. Chem., Macromol. Symp., 42/43, 373-385, (1991).
31. A. Verma, A. Nielsen, J. E. McGrath, and J. S. Riffle, "Synthesis of a Model Triblock for Novel Thermoplastic Elastomers," Rubber Chemistry and Technology, 64, 601-609, (1991).
32. B. Wang, G. L. Wilkes, C. D. Smith, and J. E. McGrath, "High Refractive Index Hybrid Ceramer Materials Prepared from Titanium Tetraisopropoxide and Poly(Arylene Ether Phosphine Oxide) Through Sol-Gel Processing," Polymer Communications, 32 (13), 1991.
33. J. L. Hedrick, I. Yilgor, M. Jurek, J. C. Hedrick, G. L. Wilkes, and J. E. McGrath, "Chemical Modification of Matrix Resin Networks with Engineering Thermoplastics: 1. Synthesis, Morphology, Physical Behaviour and Toughening mechanisms of Poly(Arylene Ether Sulphone) Modified Epoxy Networks," Polymer (London), 32 (11), 2011, (1991).
34. C. D. Smith, H. F. Webster, J. P. Wightman, and J. E. McGrath, "Unique Features of Poly(Aryl Phosphorus Oxides)," High Performance Polymers, 4(3), 211-229, (1991).
35. T. M. Moy, Y. J. Kim, A. Gungor, and J. E. McGrath, "Synthesis of Soluble High Tg Polyimides Utilizing Ester-Acid Dianhydride Derivatives," Proceedings of the Fourth International Conference on Polyimides, (1991).
36. Y. J. Kim, T. M. Moy, and J. E. McGrath, "Investigations of the Imidization Process," Proceedings of the Fourth International Conference on Polyimides, (1991).
37. M. E. Rogers, H. Grubbs, R. Mercier, D. Rodrigues, G. L. Wilkes, and J. E. McGrath, "Very High Tg, Soluble Polyimides Based on the "3F" Monomers," Proceedings of the Fourth International Conference on Polyimides, (1991).
38. M. E. Rogers, D. Rodrigues, A. Brennan, G. L. Wilkes, and J. E. McGrath, "Synthesis and Characterization of Perfectly Alternating Segmented Fully Cyclized Polyimide Siloxane Copolymers," Proceedings of the Fourth International Conference on Polyimides, (1991).
39. J.C. Hedrick, D.A. Lewis, T.C. Ward and J.E. McGrath, "Electomagnetic Processing of Polymers: Basic Concepts and Molecular Design of the Macromolecules," Materials Research Society Symposium Proceedings, Volume 189, pp. 421-430, (1991).
40. M. Chen, M.A. Zumbrum, J.C. Hedrick, J.E. McGrath and T.C. Ward, "Electromagnetic Processing of Polymers: Quantitative Investigations of Microwave Processed Thermoplastics," Materials Research Society Symposium Proceedings, Volume 189, pp. 431-440, (1991).
41. T.-H. Yoon and J. E. McGrath, "Adhesion Study of PEEK/Graphite Composites;" SAMPE Proceedings (San Diego), 36(1), 428-436 (1991).
42. S. P. Wilkinson, S. C. Liptak, P. A. Wood, J. E. McGrath and T. C. Ward, "Reactive Blends of Amorphous Functionalized Engineering Thermoplastics and Bismaleimide/Diallyl Bisphenol-A Resins for High Performance Composite Matrices," SAMPE (San Diego), 36(1), 482-495 (1991).
43. P. A. Wood, G. D. Lyle, A. Gungor, C. D. Smith, and J. E. McGrath, "Synthesis of New Bismaleimides Derived from Bis(3-Amino Phenoxy) Triphenylphosphine Oxide and Bis(4-Fluoro Benzoyl) Benzene;" SAMPE (San Diego), 36(2), 1355-1367 (1991).
44. K. R. Lyon, D. K. Mohanty, G. D. Lyle, T. Glass, H. Marand, A. Prasad, and J. E. McGrath, "Synthesis of Semicrystalline Poly(Arylene Ether) Ketone Thermoplastic Resins and Structural Adhesives Systems via amorphous Ketimine Intermediates: Influence of Ketone/Ether Backbone Ratio on Thermal Transition Behavior;" SAMPE (San Diego), 36(1), 417-427 (1991).
45. J. E. McGrath, H. Grubbs, M. E. Rogers, A. Gungor, W. A. Joseph, H. A. Marand, and A. Prasad, "Molecular Design of Processable High Tg Thermoplastic Matrix Resins and Structural Adhesives;" SAMPE International Technical Conference (Kiamesha Lake, NY), 23, 119-132 (1991).
46. A. Verma, A. Neilson, J.M. Bronk, J.E. McGrath, J.S. Riffle, "Synthesis of new, Functionalized Poly(butyl vinyl ether) Oligomers and Novel Copolymers Containing These Materials," Die Makromol. Chem., Macromol. Symp., 47, 239-252, (1991).
47. J.E. McGrath, J.L. Hedrick, A.C. Yang, M. Scott, and J.C. Economy, "Elastomeric Behavior of Crosslinked Poly(aryl ether ketone)s at Elevated Temperatures," Polymer (London), 33(23), 5094, (1992).
48. T.H. Yoon, C. A. Arnold, and J. E. McGrath, "Adhesion Behavior of Thermoplastic Polyimides and Polyimide-Siloxane Segmented Copolymers: Influence of Test Temperatures," The Journal of Adhesion, 39, 15-27, (1992).
49. M. Spinu and J. E. McGrath, "Synthesis of Modified SiO2 Networks. Polydimethylsiloxane-SiO2 Organic-Inorganic Hybrids via Sol-Gel Chemistry," Journal of Inorganic and Organometallic Polymers, 2 (1), 103-128, (1992).
50. D.A.Lewis, J.D. Summers, T.C. Ward, and J.E. McGrath, "Accelerated Imidization Reactions Using Microwave Radiation," J. Polym. Sci, Part A, 30, 1647-1653, (1992).
51. S.D. Smith, J.M. DeSimone, H. Huang, G. York, D.W. Dwight, G.L. Wilkes, and J.E. McGrath, "Synthesis and Characterization of Poly(methyl methacrylate)-g-poly(dimethylsiloxane) Copolymers. 1. Bulk and Surface Characterization." Macromolecules, 25, 2575-2581, (1992).
52. S.J. Pak, G.D. Lyle, R. Mercier, and J.E. McGrath, "Synthesis and Characterization of Novel Toughened Thermosets Derived from Pendant Amines on the Backbone of Poly(Arylene Ether Sulfone)s," Polymer Bulletin, 29(5), 477, (1992).
53. Y. Delaviz, A. Gungor, J.E. McGrath, and H.W. Gibson,"Soluble Phosphine Oxide Containing Aromatic Polyamides," Polymer, 34(1), pp. 210-213, (1992).
54. T.H. Yoon and J.E. McGrath, "Enhanced Adhesive Performance of Thermoplastic Poly(imide-siloxane) Segmented Copolymer with PEEK®-Graphite Composites by Gas Plasma Treatment," High Performance Polymers, 4(4), 203-214 (1992).
55. M. E. Rogers, D. Rodrigues, A. Brennan, G. L. Wilkes, and J. E. McGrath, "Synthesis and Characterization of Perfectly Alternating Segmented Fully Cyclized Polyimide Siloxane Copolymers," Progress in Pacific Polymer Science 2, (1992).
56. M.E. Rogers, T.M. Moy, Y.J. Kim, and J.E. McGrath, "New Developments in Soluble Thermoplastic High Glass Transition Temperature Polyimides," MRS Symposium G Proceedings, 264, 13-39, (1992).
57. M. Sheridan and J.E. McGrath, "Synthesis of Well-Defined All-Acrylic Graft Copolymers," Die Makromolekulare Chemie, Macromol. Symp., 64, 85-111, (1992).
58. D. Feng, G.l. Wilkes, B. Lee and J.E. McGrath, "Structure-Property Behavior of Segmented Poly(tetramethylene oxide)-Based Bipyridinium Ionene Elastomers," Polymer, 33(3), 526-535, (1992).
59. L.N. Venkateshwaran, G.A. York, C.D. DePorter, J.E.McGrath and G.W. Wilkes, "Morphological Characterization of well defined methacrylic based di- and triblock ionomers," Polymer, 33(11), 2277-2286 (1992).
60. S. J. Pak, G. D. Lyle, and J. E. McGrath, "Synthesis of Novel Thermosets from Pendent Amine Groups on Poly(Arylene Ether)s," SAMPE Proceedings (Anaheim), 37, 667-679, (1992).
61. K. R. Lyon, A. Texier, A. Gungor, R. M. Davis and J. E. McGrath, "Novel Synthesis of Small Semicrystalline PEEK Particles and Carbon Fiber Composites Fabricated via Powder Prepregging," SAMPE Proceedings (Anaheim), 37, 1301-1313, (1992).
62. M. E. Rogers, H. Grubbs, A. Brennan, D. Rodrigues, T. Lin, H. Marand, G. L. Wilkes and J. E. McGrath, "Very High Tg Soluble Polyimides Based on the "3F" Monomers," SAMPE Proceedings (Anaheim), 37, 717-729, (1992).
63. M.E. Rogers, D. Rodrigues, A. Brennan, G.L. Wilkes and J.E. McGrath, "Novel Polyimide Siloxane Segmented Copolymers," SAMPE Electronics Conference Proceedings, 6, 535-546, Baltimore, MD, June 22-25, 1992.
64. M. S. Sheridan and J. E. McGrath, "Synthesis of Well-Defined All-Acrylic Graft Copolymers," Macromol. Chem., Macromol. Symp. (64th International Symposium on New Polymers, 1991), 85-111 (1992.)
65. Y. Delaviz, A. Gungor, J.E. McGrath, and H.W. Gibson, "Phosphine Oxide Containing Aromatic Polyester," Polymer, 33(24), pp. 5346-5347, (1993).
66. T. Lin, K.W. Stickney, M.E. Rogers, J.S. Riffle, J.E. McGrath, H. Marand, T.H.Yu, and R.M. Davis, "Preparation of Sub-micron Polyimide Particles by Precipitation from Solution," Polymer (London), 34(4), 772-777, (1993).
67. S. Kalachandra, D.F. Taylor, C.D. DePorter, H.J. Grubbs, and J.E. McGrath, "Polymeric Materials for Composite Matrices in Biological Environments," Polymer (London), 34(4), 778, (1993).
68. T.M. Moy, C.D. DePorter, and J.E. McGrath, "Synthesis of Soluble Polyimides and Functionalized Imide Oligomers Via Solution Imidization of Aromatic Diester-Diacids and Aromatic Diamines," Polymer (London), 34(4), 819-825, (1993).
69. J.E. McGrath, M.E. Rogers, M.H. Woodard, A. Brennan, P.M. Cham, and H. Marand, "Semicrystalline and Amorphous Fluorine Containing Polyimides," Polymer (London), 34(4), 849-856, (1993).
70. Joseph, R. Mercier, A. Prasad, H. Marand, and J.E. McGrath, "Synthesis of 4,4'-Isopropylidene Diphenol (Bisphenol-A) Based Polybenzoxazoles Via an Acid-Catalyzed Solution Cyclization Process," Polymer (London), 34(4), 866 (1993).
71. S.P. Wilkinson, J.E. McGrath, and T.C. Ward, "Effect of Thermoplastic Modifier Variables on Toughening a Bismaleimide Matrix Resin for High Performance Composite Materials," Polymer (London), 34(4) 870-885, (1993).
72. A. Texier, R.M. Davis, K.R. Lyon, A. Gungor, J.E. McGrath, H. Marand, and J.S. Riffle, "Fabrication of PEEK/Carbon Fiber Composites by Aqueous Suspension Prepregging," Polymer (London), 34(4), 896-906, (1993).
73. T.C. Ward, M. Chen, E.J. Siochi, and J.E. McGrath, "Basic Ideas of Microwave Processing of Polymers," Polymer Engineering and Science, 33, 1092, (1993).
74. T.C. Ward, M. Chen, E.J. Siochi, and J.E. McGrath "The Dielectric Behavior of Glassy Amorphous Polymers at 2.45 GHz," Polymer Engineering and Science, 33, 1110, (1993).
75. T.C. Ward, J.W. Hellgeth, M. Chen, E.J. Siochi, and J.E. McGrath "The Microwave Processability of Semicrystalline Polymers," Polymer Engineering and Science, 33, 1122, (1993).
76. Y. Kim, G.D. Lyle, T.E. Glass, and J.E. McGrath, "Kinetic and Mechanistic Investigations of the Formation of Polyimides Under Homogeneous Conditions," Macromolecules, 26, 1344-1358, (1993).
77. McGrath, J. E., Hedrick, J. C. and Patel, N. M., "Toughening of Epoxy Resin Networks With Functionalized Engineering Thermoplastics," ACS Advances in Chem. Series, 233, 293-304, (1993).
78. McGrath, J.E., Pak, S.J., Lyle, G.D. and Mercier, R., "Synthesis and Characterization of Novel Toughened Thermosets Derived from Pendant Amines on the Backbone of Poly(Arlyene Ether Sulfone)s," Polymer (London), 34 (4), 885, (1993).
79. McGrath, J.E. and Srinivasan, S.A., "Solubility Parameter as a Tool for Selection of Thermoplastic Tougheners for Cyanate Ester Thermosetting Networks," SAMPE Quarterly, 24 (3), 25, (1993).
80. Smith, C.D., Gungor, A., P.A. Wood, S.C. Liptak, H. Grubbs, T.H. Yoon, And J.E. McGrath, "Hydrolytically Stable Thermoplastic and Thermosetting Poly(Arylene Phosphine Oxide) Material Systems", Makromol. Chem., Macromol. Symp., 74, 185-188, (1993).
81. S.A. Srinivasan and J.E. McGrath, "Amorphous Bisphenol-A Based Poly(arylene ether) Modified Cyanate Ester Networks," High Performance Polymers, 5(4), 259-274, (1993).
82. G.W. Meyer, S. Jayaraman, Y.J. Lee, G.D. Lyle, T.E. Glass, and J.E. McGrath, "Synthesis and Characteriazation of Soluble, High Temperature 3-Phenylethynyl Aniline Functionalized Polyimides via the Ester-Acid Route," Spring MRS Proceedings (1993).
83. C.D. Smith, H.J. Grubbs, A. Gungor, J. Wescott, S.C. Liptak, P.A. Wood, and J.E. McGrath, "Fire-Resistant Hydrolytically Stable Poly(Arylene Phosphine Oxide) Material Systems," Proceedings of the International Conference for the Promotion of Advanced Fire Resistant Aircraft Interior Materials, 159-174, Atlantic City, New Jersey, February (1993).
84. B.G. Risch, I.Y. Wan, J.E. McGrath and G.L. Wilkes, "Generation and Structure-Property Behavior of Novel Liquid Crystalline Foams Produced via Gas Supersaturation Technique," J. Applied Science, 53, 933-951 (1994).
85. S.D. Smith, T.E. Long and J.E. McGrath, "Thermogravimetric Analysis of Poly (alkyl Methacrylates) and Poly (methylmethacrylate-g-dimethyl Siloxane) Graft Copolymers," Journal of Polymer Science: Part A: Polymer Chemistry 32, 1747-1753 (1994).
86. T.M. Moy, M. Konas, J.E. McGrath and E. K. Fields, "Synthesis of Soluble Thermosetting Polyimides Derived from 1,4-Phenylene Bis(Phenyl-Maleic Anhydride) and Aromatic Diamines," Journal of Polymer Science, 32, 2377-2385 (1994).
87. T.M. Moy and J.E. McGrath, "Synthesis of Hydroxyl Containing polyimides Derived From 4,6-Diamino-Resorcinol Dihydrocloride and Aromatic Tetracarboxylic Dianhydrides," Journal of Polymer Science: Part A: Polymer Chemistry, 32, 1903-1908, (1994).
88. T.H. Yoon, S.C. Liptak, D.B. Priddy and J.E. McGrath, "Adhesive and Mechanical Properties of Reactive Polysulfone Modified Epoxy Resins," Journal of Adhesion, 45, pp. 191-203 (1994).
89. M.E. Rogers, T.E. Glass, S.J. Mecham, D. Rodrigues, G.L. Wilkes and J.E. McGrath, "Perfectly Alternative Segmented Polyimide-Polydimethyl Siloxane Copolymers via Transimidization," Journal of Polymer Science: Part A: Polymer Chemistry, 32, 2663-2675 (1994).
90. V.N. Sekharipuram, I.Y. Wan, S.S. Joardar, T.C. Ward and J.E. McGrath, "Synthesis and Characterization of Melt-Processible, High Molecular Weight Poly(amide-imides),"ACS Symposium Series: High Temperature Properties and Applications of Polymer and Polymer Composites, (1994).
91. T. E. Long, R. A. Guistina, B. A. Schell, and J. E. McGrath, "Hindered Lithium Dialkylamide Initiators for the Living Anionic Polymerization of Methacrylic Esters," Journal of Polymer Science: Part A Polymr Chemistry, 32, 2425-2430 (1994).
92. J. W. Wescott, T. H. Yoon, D. Rodrigues, L. A. Kiefer, G. L. Wilkes, and J. E. McGrath, "Synthesis and Charactrization of Triphenylphosphine Oxide-Containing Poly(aryl imide)- Poly(Dimethyl Siloxane) Randomly Segmented Copolymers," Pure Appl. Chemistry, A31(8), 1071-1085, (1994).
93. C. D. Deporter, T. E. Long, and J. E. McGrath, "Methacrylate-Based Block Ionomers I: Synthesis of Block Ionomers Derived from t-Butyl Methacrylate and Alkyl Methacrylates," Polymer International 33, 205-216, (1994).
94. C. Y. Stacey Fu, D. B. Priddy, Jr., G. D. Lyle, J. E. McGrath, H. S. Lackritz, "Polymer Physics of High Temperature Polymers for Second Order Nonlinear Optics," Material Reserach Society Symposium Proceedings, 328, 547-552, (1994).
95. D. B. Priddy Jr., C.Y. Stacey Fu, T. L. Pickering, H. S. Lackritz, and J. E. McGrath, "Phosphorus-Containing Poly(Arylene Ether)s as Second Order Nonlinear Optical Materials," Materials Research Society Symposium Proceedings, 328, 589-594, (1994).
96. S. A. Srinivasan, S. S. Joardar, D. B. Priddy, Jr., T. C. Ward, and J. E. McGrath, "Reactive Poly(Arylene Ether) Toughening of Cyanate Ester Networks via Thermal and Microwave," Materials Research Society Symposium Proceedings,, 347, 705-710, (1994).
97. W. D. Joseph, J. C. Abed, R. Mercier and J. E. McGrath, "Synthesis and Characterization of Fluorinated Polybenzoxazoles via Solution Cyclization Techniques," Polymer, 35(23), 5046-5050 (1994).
98. M. H. Brink, D. K. Brandom, G. L. Wilkes and J. E. McGrath, "Synthesis and Characterization of a Novel '3F' -Based Fluorinated Monomer for Fluorine-Containing Polyimides," Polymer, 35(23), 5018-5023, (1994).
99. J. M. Kaltenecker-Commercon, T. C. Ward, A. Gungor, and J. E. McGrath, "Water Resistance of Poly(Imide-Siloxane) Adhesives: Diffusion Coefficients by Gravimetric Sorption," Journal of Adhesion, 44, 85-102, (1994) 60.
100. J. E. McGrath, H. J. Grubbs, L. A. Kiefer, M. Martinez, P. A. Wood, C. D. Smith, D. Knauss, G. Meyer, S. K. Jayaraman, G. D. Lyle, J. C. Abed, Y. Lin, P. Lakshmanan and D. B. Priddy, Jr.,"Low Flame Smoke and Toxicity (FSG) Materials," 39th International SAMPE Proceedings April 11-14, (1994) 944.
101. J. E. McGrath, G. W. Meyer, S. K. Jayaraman, M. E. Rogers, Y. Lin, J. M. Wescott, P. Lakshmanan and R. M. Davis, "Advances in High Performance Thermoplastic and Thermosetting Polyimides," 39th International SAMPE Proceedings April 11-14, (1994) 930.
102. G. W. Meyer, B. Tan and J. E. McGrath, "Solvent-resistant Polyetherimide Network Systems Via Phenylethynylphthalic Anhydride Endcapping," High Performance Polymers, 6, 423-435, (1994).
103. S. A. Srinivasan, S. S. Joardar, D. B. Priddy, Jr., T. C. Ward and J. E. McGrath,"Reactive Poly(Arylene Ether) Toughening of Cyanate Ester Networks via Thermal and Microwave Curing," 39th International SAMPE Proceedings April 11-14, (1994) 60.
104. J. L. Hopewell, D. J. T. Hill, J. H. O?Donnell, P. J. Pomery, J. E. McGrath, D. B. Priddy, Jr., and C. D. Smith, "The Radiation Chemistry of Poly(arylene ether phosphine oxide)s," Polym. Degrad. Stab. 45(3), 293-299 (1994).
105. G. W. Meyer, S. J. Pak, Y. J. Lee and J. E. McGrath, "New High Performance Thermosetting Polymer Matrix Material Systems," Polymer, 36(11), 2303-2309, (1995).
106. S.K. Jayaraman, R. Srinivasan and J. E. McGrath, "Synthesis and Characterization of 3-Phenylethynyl Endcapped Matrix Resins," Journal of Polymer Science Part A: Polymer Chemistry, 33, 1551-1563, (1995).
107. S. Jayaraman, G. W. Meyer, T. M. Moy, R. Srinivasan and J. E. McGrath, "Synthesis and Characterization of 3-PhenylEthynyl Endcapped Matrix Resins," Journal of Polymer Science, Part A: Polymer Chemistry, 33(10), 1551-1565, (1995).
108. M. Konas, T. M. Moy, M. E. Rogers, A. R. Shultz, T. C. Ward and J. E. McGrath, "Molecular Weight Characterization of Soluble High Performance Polyimides. 1. Polymer-Solvent-Stationary Phase Interactions in Size Exclusion Chromatography," Journal of Polymer Science: Polymer Physics ed., 33, 1429-1439, (1995).
109. M. Konas, T. M. Moy, M. E. Rogers, A. R. Shultz, T. C. Ward and J. E. McGrath, "Molecular Weight Characterization of Soluble High Performance Polyimides. 2. Validity of Universal SEC Calibration and Absolute Molecular Weight Calculation," Journal of Polymer Science: Polymer Physics ed. 33, 1441-1448, (1995).
110. E. Bonaplata, H. Ding, B. E. Hanson and J. E. McGrath, "Hydroformylation of Octene-1 over a Rhodium Complex of the Novel Polymer, Poly(Arylene Ether Triaryl Phosphine Oxide)," Polymer, 36(15), (1995), 3035-3039.
111. Y. Chujo and J.E. McGrath, "Synthesis of a , w -Bifunctional Fluorine-Containing Polysiloxanes by Hydrosilation Reaction," J. Macromolecular Science: Pure Appl. Chem. A32(1), 29-40 (1995).
112. M. Chen, J. W. Hellgeth, T. C. Ward and J. E. McGrath, "Microwave Processing of Two-Phase Systems: Composites and Polymer Blends," Polym. Eng. Sci. 35(2), 144-50 (1995).
113. T.H. Yoon, D.B. Priddy, Jr., G.D. Lyle and J.E. McGrath, "Mechanical and Morphological Investigations of Reactive Polysulfone Toughened Epoxy Networks," Macromol. Symp. 98, 673-686 (1995).
114. C.L. Heisey, P.A. Wood, J.E. McGrath and J.P. Wightman, "Measurement of Adhesion Between Carbon Fibers and Bismaleimide Resins," J. Adhesion 53, 117-147. (1995).
115. D. Loveday, G.L. Wilkes, C.D. DePorter, and J.E. McGrath, "Structure and Properties of Butadiene?tert- Butyl Methacrylate and Butadiene/Styrene?tert-butyl Methacrylate Triblock Copolymer Ionomers, "Macromolecules, 28, 7822-7830 (1995).
116. V. Sekharipuram, I.Y. Wan, S.S. Joardar, T.C. Ward and J.E. McGrath "Synthesis and Characterization of Melt-Processible, High-Molecular-Weight Poly (amide-imides)," ACS Symposium Series 603, High-Temperature Properties and Applications of Polymeric Materials, eds. M.R. Tant, J.W. Connell, H.L.N. McManus, Washington, D. C., (1995), 238-255.
117. G.W. Meyer, T.E. Glass, H.J. Grubbs, and J.E. McGrath, "Synthesis and Characterization of Polyimides Endcapped with Phenylethynylphthalic Anhydride," J. Polymer Science: Part A: Polymer Chemistry, 33, 2141-2149 (1995).
118. G.W. Meyer, J.L. Heidbrink, J.G. Franchina, R.M. Davis, S. Gardner, V. Vasudevan and J.E. McGrath, "Design and Characterization of Processible High Temperature Thermosetting Polyimide Systems," Society for the Advancement of Materials and Process Engineering (SAMPE), 40, 1094, (1995).
119. E. Bonaplata, C.D. Smith, and J.E. McGrath, "Metal Salt ?Polymer Composites: Complexation of Metal Salts with the Phosphorus-Oxygen Bond in Poly(arylene ether phosphine oxide)s," in ACS Symposium Series, No. 603, High-Temperature Properties and Applications of Polymers, Washington, D.C. 227-237 (1995).
120. Y.J. Lee, A. Gungor, T.H. Yoon, and J.E. McGrath, "Adhesive and Thermomechanical Behavior of Phosphorus-Containing Thermoplastic Polyimides," J. Adhesion, 55, 165-177 (1995).
121. V. Vasudevan and J.E. McGrath, "Atomistic Modeling of Amorphous Aromatic Polybenzoxazoles," Macromolecules, 29, 637-645 (1996).
122. B. Risch, D. E. Rodrigues, K. Lyon, J. E. McGrath, and G. L. Wilkes, "Structure-Property of Poly(etheretherketone)-Poly(dimethylsiloxane) Block Copolymers and Their Ketamine Precursors," Polymer, 37, No. 7, 1229-1242 (1996).
123. Hedrick, J. L., Charlier, Y., DiPietro, R., Jayaraman, S., and McGrath, J. E., "High Tg Polyimide Nanofoams Derived from Pyromellitic Dianhydride and 1,1-Bis(4-aminophenyl)-1-phenyl-2,2,2-trifluoroethane," accepted Journal of Polymer Science:Part A: Polymer Chemistry (1996).
124. Stacey-Fu, C. Y., Lackritz, H. S., Priddy, D. B., and McGrath, J. E., "Effects of Chromophore Functionalization and Physical Aging During Poling on Chromophore Orientational Dynamics in Poly(arylene ether)s for Second-Order Nonlinear Optics," Macromolecules, 29, 3470-3474 (1996).
125. Brown, J.M., Srinivasan, S., Rau, A., Ward, T. C., McGrath, J.E., Loos, A. C., Hood, D. and Kranbuehl, D. E.,"Production of Controlled Networks and Morphologies in Toughened Thermosetting Resins Using Real-Time, in situ Cure Monitoring," Polymer, 37(9), 1691-1696, (1996).
126. A.V. Rau, S.A. Srinivasan, J.E. McGrath, A.C. Loos, "Prepregging and Composite Manufacture with Toughened Cyanate Ester Resins Systems," from Proceedings of the American Society for Composites, Eleventh Technical Conference, October 7-9, 1996, Atlanta, GA (1996).
127. B. Risch, B. G., Rodrigues, D. E., Lyon, K., McGrath, J. E., and Wilkes, G. L.,"Structure-property Behaviour of Poly(ether ether ketone)-Polydimethylsioxane Block Copolymers and Their Ketamine Precursors," Polymer, 37(7), 1229-1242 (1996).
128. Meyer, G. W., Heidbrink, J. L., Franchina, J. G., Davis, R. M., Gardner, S., Vasudevan, V., Glass, T. E., and McGrath, J. E., "Phenylmaleimide Endcapped Arylene Ether Imide Oligomers," Polymer, 37, 22, 5077-5088 (1996).
129. McGrath, J. E., Ghassemi, H., Riley, D., Wan, I.Y., Bhatnagar, A., Kashiwagi, "The Synthesis and Characterization of New Thermoplastic Fire Resistant Materials," Plastics- Racing into the Future, Proceedings of the SPE 54th Annual Technical Conference & Exhibits, 1996.
130. S. Srinivas, M. Graham, M.H. Brink, S. Gardner, R.M. Davis, J.E. McGrath and G.W. Wilkes, "Influence of Melt Stability on the Crystallization of Bis(4-Aminophenoxy)Benzene-Oxydiphthalic Anhydride Based Polyimides," Polymer Engineering and Science, Vol. 36, No. 14 (1996).
131. H.K. Shobha, M. Sankarapandian, A.R. Shultz, S. Kalachandra, D.F. Taylor, and J.E. McGrath, "Influence of Molecular Structure on the Free Radical Initiated Network Polymerization of Dimethacrylates," Macromol. Symp. 111, 73-83 (1996).
132. M. Sankarapandian, Q. Xu, J.E. McGrath, D.T. Taylor, S. Kalachandra, "Influence of Resin Molecular Structure on the Processability and Physical Behavior of a Dental Composite Matrix," Journal of Advanced Materials, Vol. 28, No. I, pp. 59-63 (1996).
133. S. Srinivas, F.E. Caputo, M. Graham, S. Gardner, R.M. Davis, J.E. McGrath and G.L. Wilkes, "Semicrystalline Polyimides Based on Controlled Molecular Weight Phthalimide End-Capped 1,3-Bis(4-aminophenoxy)benzene and 3,3?,4,4?-Biphenyltetracarboxylic Dianhydride: Synthesis, Crystallization, Melting, and Thermal Stability," Macromolecules, 30, 1012-1022 (1997).
134. S.A. Srinivasan, S.S. Joardar, D. Kranbuehl, T.C. Ward and J.E. McGrath, "Amorphous Phenolphthalein-based Poly(arylene ether)-Modified Cyanate Ester Networks: Microwave Processing," J. Applied Polymer Science, 64: 179-190 (1997).
135. K.R. Carter, R. A. DiPietro, M. I. Sanchez, T. P. Russell, P. Lakshmanan and J. E. McGrath, "Polyimide Nanofoams Based on Ordered Polyimides Derived from Poly(amic alkyl esters): PMDA/4-BDAF," Chemistry of Materials, 9:1, 105-118 (1997).
136. J.C. Abed, R. Mercier and J. E. McGrath, "Synthesis and Characterization of New Phosphorus and Other Heteroatom Containing Aryl Cyanate Ester Monomers and Networks," Journal of Polymer Science. Part A: Polymer Chemistry, 35: 977-987, (1997).
137. B. Tan, V. Vasudevan, Y.J. Lee, S. Gardner, R.M. Davis, T. Bullions, A.C. Loos, H. Parvatareddy, D.A. Dillard, J.E. McGrath and J. Cella, "Design and Characterization of Thermosetting Polyimide Structural Adhesive and Composite Matrix Systems," Journal of Polymer Science, Part A: Polymer Chemistry, Vol. 35, pp. 2943-2954, (1997).
138. H. Ghassemi and J. E. McGrath, "Synthesis of Poly(arylene phosphine oxide) by Nickel Catalyzed Coupling Polymerization," Polymer 38, 12, 3139-3143 (1997).
139. L.A. Kiefer, T.H. Yoon, T.E. Glass, S.K. Jayaraman, and J.E. McGrath, "Synthesis and Characterization of Semi-Crystalline Cycloaliphatic Polyester/Poly(dimethylsiloxane) Segmented Copolymers," Journal of Polymer Science, Part A: Polymer Chemistry, Vo. 35, pp. 3495-3506 (1997).
140. H.K. Shobha, M. Sankarapandian, S. Kalachandra, D.F. Taylor, and J.E. McGrath, "Characterization of Some Aromatic Dimethacrylates for Dental Composite Applications," J. Mater. Sci. Mater. Med (in press) (1997).
141. H.K. Shobha, M. Sankarapandian, S. Kalachandra, D.F. Taylor, and J.E. McGrath, "Structure Property Relationships Among Novel Dental Composite Matrix Resins," J. Mater. Sci. Mater. Med (in press) (1997).
142. S. Kalachandra, M. Sankarapandian, H.K. Shobha, D.F. Taylor, and J.E. McGrath, "Influence of Hydrogen Bonding on Properties of Bis-GMA Analogues," J. Mater. Sci. Mater. Med., 8, pp. 283-286, (1997).
143. H.K. Shobha, M. Sankarapandian, S. Kalachandra, D.F. Taylor, and J.E. McGrath, "Effect of Dilution on the Kinetics of Crosslinking Polymerization of Dimethacrylate Monomers," J. Mater. Sci. Mater. Med 8, (1997).
144. J.E. McGrath, H. Ghassemi, D. Riley,Y.N. Liu, I. Y. Wan, A. Bhatnagar, J. Geibel, and T. Kashiwagi, "The Synthesis and Characterization of New Thermoplastic Fire Resistant Materials," Polymer Engr. Sci., Vo. 42 (1997).
145. J.L. Hedrick, K. Carter, M. Sanchez, R, DiPietro, S. Swanson, S. Jayaraman, and J.E. McGrath, "Crosslinked Polyimide Foams Derived from Poly(imide propylene oxide) Copolymers," Macromol. Chem. Phys. 198, 549-559 (1997).
146. S.A. Srinivasan, and J.E. McGrath, "Amorphous Phenolphthalein-Based Poly(arylene ether)-Modified Cyante Ester Networks: Effect of Thermal Cure Cycle on Morphology and Toughenability," J. Applied Poly. Science., 64, pp. 167-178 (1997).
147. I.V. Farr, T.E. Glass, Q. Ji, and J.E. McGrath, "Synthesis and Characterization of Diamino-phenylindane Based Polyimides via Ester-Acid Solution Imidization," High Performance Polymers, 9, pp. 345-352 (1997).
148. S. Srinivasan, L. Kagumba, D.J. Riley, and J.E. McGrath, "Synthesis of Hydrolytically Stable Phosphorus-Containing Polymers via Polycondensation and their Utilization in Polymer Blends," Macromol. Symp. 122, pp. 95-100 (1997).
149. D.J. Riley, A. Gungor, S.A. Srinivasan, M.Sankarapandian, C. Tchatchoua, M.W. Muggli, T.C. Ward, J.E. McGrath and T. Kashiwagi, "Synthesis and Characterization of Flame Resistant Poly(arylene Ether)s," Polm. Eng. Sci, (NIST contributions to the 1996 SPE ANTEC), 37(9), 1430-1595 (1997).
150. S. Kalachandra, D.F. Taylor, M. Sankarapandian, H.K. Shobha, and J.E. McGrath, "Polymeric Materials in Biological Environments," IUPAC MACRO ?98, Jan, 5-9, 1998, Madras India (1998).
151. H. Ghassemi, D.J. Riley M. Curtis, E. Bonaplata, and J.E. McGrath, "Main Chain Poly(arylene ether) Phosphonium Ionomers," Applied Organometalic Chemistry, 12, 781-785 (1998).
152. B. Tan, C.N. Tchatchoua, L. Dong, and J.E. McGrath, "Synthesis and Characterization of Arylene Ether Imide Reactive Oligomers and Polymers Containing Diaryl Alkyl Phosphine Oxide Groups," Polym. Adv. Technol. 9, 84-93 (1998).
153. A.V. Rau, S.A. Srinivasan, J.E. McGrath and A.C. Loos. "Resin Transfer Molding (RTM) with Toughened Cyanate Ester Resin Systems," Polymer Composites, 19(2), p. 166 (1998).
154. S. Wang, Q. Ji, C. Tchatchoua, A. Shultz and J.E. McGrath, "Phosphonyl/Hydroxyl Hydrogen Bonding-Induced Miscibility of Poly(arylene ether phosphine oxide/sulfone) statistical Copolymers with Poly(hydroxy ether) "?Phenoxy Resin?): Synthesis and Characterization, Journal of Polymer Science, Part B: Polymer Physics (submitted (1998).
155. L. Wang, Q. Ji, T. Glass, M. Muggli, T.C. Ward, J. McGrath, G. Burns and U. Sorathia, "Polydimethyl Siloxane Mod)fication of Segmented Thermoplastic Polyurethanes," ACS Rubber Division Meeting, May (1997); Polymer, in press (1998).
156. A. Ayambem, S.J. Mecham, Y. Sun, T.A. Bullions, A.C. Loos, and J.E. McGrath, "Cure, Adhesion and Composite Applications of Substituted Phenylethynyl Terminated Poly(arylene ether sulfone)s, 43^rd International SAMPE Symposium, 171-180, May 31 ? June 4 (1998).
157. Y.N. Liu, J.S. Riffle, Q. Ji, and J.E. McGrath, "Synthesis and Characterization of New Fire Resistant Thermoplastic Based on Aromatic Polymers Containing Heterocyclic Sulfur, Oxygen and/or Phosphorus Elements," 43^rd International SAMPE Symposium, 1539-1549 May 31 ? June 4 (1998).
158. M. Sankarapandian, H.K. Shobha, C. Sensenich, P. Shih, J.S. Riffle, A.C. Loos, and J.E. McGrath, "Void-Free Phenolic Networks," 43^rd International SAMPE Symposium, 1550-1559, May 31 ? June 4 (1998).
159. V. Ratta, E.J. Stancik, A. Ayambem, H. Pavatareddy, J.E. McGrath and G.L. Wilkes, "A Melt-Processable Semicrystalline Polyimide Structural Adhesive Based on 1,3-bis(4-aminophenoxy) benzene and 3,3?4,4?-biphenyltetracarboxylic Dianhydride." Polymer 40, 1889-1902 (1999).
160. J.E. McGrath, D.L. Dunson, S.J. Mecham, and J.L. Hedrick, "Synthesis and Characterization of Segmented Polyimide-Polyorganosiloxane Copolymers," Advances in Polymer Science, Vol. 141, p. 61 (1999).
161. J.L. Hedrick, K.R. Carter, J.W. Labadie, R.D. Miller, W. Volksen, C.J. Hawker, D.Y. Yoon, T.P. Russel, J.E. McGrath, and R.M. Briber, "Nanoporous Polyimides," Advances in Polymer Science, Vol. 141, p. 1 (1999).
162. T.A. Bullions, R.H. Mehta, B. Tan, J.E. McGrath, D. Kranbuehl, and A.C. Loos, "Mode I and Mode II Fracture Toughness of High Performance 3000 G Mole^-1 Reactive Poly(etherimide)/Carbon Fiber Composites," Composites, Part A, 30, pp. 153-162 (1999).
163. Christopher Allam, Kuo J. Liu, James E. McGrath, and Dillip K. Mohanty, "Preparation and Properties of Novel Aromatic Poly(thioethers) Derived from 4,4'-thiobisbenzenethiol," Macromol. Chem. Phys. 200, 1854-1862 (1999).
164. H. Parvatareddy, H.G. Dillard, J.E. McGrath, and D.A. Dillard, "Solvent Effects on High Temperature Polyimides and Their Bonded Joints," Journal of Adhesion, 69, No.1-2, p. 83 (1999).
165. H. Zhuang, M.S. Sankarapandian, Q. Ji, and J.E. McGrath, "Thermosetting Polyetherimides: The Influence of Reactive Endgroup Type and Oligomer Molecular Weight on Synthesis, Network Formation, Adhesion Strength and Thermal Properties," Journal of Adhesion, Vol. 71, pp 231-262 (1999).
166. S. Wang, Q. Ji, C.N. Tchatchoua, A.R Shultz, and J.E. McGrath ,"Phosphonyl/Hydroxyl Hydrogen Bonding-Induced Miscibility of Poly(Arylene Ether Phosphine Oxide/Sulfone) Statistical Copolymers with Poly(Hydroxy Ether) ("Phenoxy Resin"): Synthesis and Characterization," Journal of Polymer Science, Part B: Polymer Physics, 37:15 1849-1862 (1999).
167. L.F. Wang, Q. Ji, T. Glass, M. Muggli, T.C. Ward, J. McGrath, G. Burns and U. Sorathia, "Polydimethyl Siloxane Modification of Segmented Thermoplastic Polyurethanes," Polymer, 2000, 41, 5083-5093. (1999).
168. C.S. Tyberg, M. Sankarapandian, K. Bears, P. Shih, A.C. Loos, D. Dillard, J.E. McGrath, J.S. Riffle, and U. Sorathia, "Tough, Void-Free, Flame Retardant Phenolic Matrix Materials," Construction and Building Materials, 13, 343-353 (1999).
169. Christopher Allam, Kuo J. Liu, James E. McGrath and Dillip K. Mohanty, "Preparation and properties of novel aromatic poly(thioethers) derived from 4,4'-thiobisbenzenethiol." Macromol. Chem. Phys. 200, 1854-1862 (1999).

| back to top |

2000 - present

1. L. F. Wang. T.E. Glass, Q. Ji, T.C. Ward, M. Muggli, U. Sorathia, G. Burns, and J. E. McGrath, "Synthesis and Characterization of Organosiloxane Modified Segmented Polyether Polyurethanes," Polymer 41:13, p. 5083 (2000).
2. Y. Liu, A. Bhatnagar, Q. Ji, J.S. Riffle, J.E. McGrath, J.F. Geibel, and T. Kashiwagi, "Influence of Polymerization Conditions on the Molecular Structure Stability and Physical Behavior of Poly(phenylene sulfide sulfone) Homopolymers," Polymer 41:13, p. 5137 (2000).
3. A. Ayambem, S.J. Mecham, Y. Sun, T.E. Glass, and J.E. McGrath, "Endgroup Substituent Effects on the Rate/Extent of Cure and Adhesion for Phenylethynyl-Terminated Poly(arylene ether sulfone) Oligomers," Polymer 41:13, p. 5109 (2000).
4. T.V. Holland, T.E. Glass, and J.E. McGrath, "Investigation of the Thernal Curing Chemistry of the Phenylethynyl Group Using a Model Aryl Ether Imide," Polymer 41:13, p. 4965 (2000).
5. C.S. Tyberg, K. Bergeron, M. Sankarapandian, P. Shih, A.C. Loos, D.A. Dillard, J.E. McGrath, J.S. Riffle, and U. Sorathia, "Structure-Property Relationships of Void-Free Phenolic-Epoxy Matrix Systems," Polymer 41:13, p. 5053 (2000).
6. I.V. Farr, Dr. Kratzner, T.E. Glass, D. Dunson, Q. Ji, and J.E. McGrath, "The Synthesis and Characterization of Polyimide Homopolymers Based on 5(6)-Amino-1-(4-aminophenyl)-1,3,3-Trimethylindane," Journal of Polymer Science: Part A: Polymer Chemistry, 38, 2840-2854 (2000).
7. V. Ratta, A. Ayambem, R. Young, J.E. McGrath, and G.L. Wilkes, "Thermal Stability, Crystallization Kinetics and Morphology of a New Semicrystalline Polyimide Based on 1,3-(4-aminophenoxy) Benzene and 3,3',4,4'-Biphenyltetracarboxy Dianhydride," Polymer 41, 8121-8138 (2000).
8. S. Wang, J. Wang, Q. Ji, A.R. Shultz, T.C. Ward and J.E. McGrath, "Miscibility and Morphologies of Poly(arylene ether phenyl phosphine oxide/sulfone) Copolymer/Vinyl Ester Resin Mixtures and Their Cured Networks," Journal of Polymer Science, Part B: Polymer Physics, Vol. 38:18, pp. 2409-2421, (2000).
9. S. Wang, T.E. Glass, A.R. Shultz, and J.E. McGrath, "Novel Silica/Phosphorus-Containing Polymer Hybrid Nanocomposites," Chemistry of Materials, "Communications" Section, submitted.
10. Sheng Wang, Hong Zhuang, H. K. Shobha, T. E. Glass, M. Sankarapandian, Qing Ji, A. R. Shultz, J. E. McGrath, "On the Miscibility of Poly(arylene phosphine oxide) Systems and Bisphenol A Poly(hydroxy ether)." Macromolecules, in press.
11. V. Ratta, A. Ayambem, J.E. McGrath, and Garth L. Wilkes, "Crystallization and Multiple Melting Behavior of a New Semicrystalline Polyimide Based on 1,3-bis-(4aminophenoxy) Benzene (TPER) and 3,3?, 4,4?-biphenonetetracarboxylic dianhydride (BTDA), Polymer, in press, (2000).
12. Bullions, T. A., J. M. Jungk, A. C. Loos and J. E. McGrath, "Moisture Sorption Effects on Carbon Fiber-Reinforced PhenylEthynyl-Terminated Ultem Composites," Journal of Thermoplastic Composite Materials, Vol. 13, No. 6, Nov, 2000, pp. 460-480.
13. T.A. Bullions, M.P. Stoykovich, A.C. Loos and J.E. McGrath, "Tg Response to Cure Schedule Variations: Phenylethynyl-Terminated UltemÔ Composites," 45^th International SAMPE Symposium, p. 1048 (2000).
14. M. Sankarapandian, T.E. Glass, J.E. McGrath, M. Pack, M. Smith, P. Glatkowski, J. Conroy, and J. Piche, "Toughening and Cure Optimization of Fire Resistant Biphenyl Based Bisphthalonitrile," 45^th International SAMPE Symposium, p. 1214 (2000).
15. H.K. Shobha, H. Johnson, M. Sankarapandian, P.Rangarajan and J.E. McGrath, "Melt Stable Aromatic Polyphosphonates," 46^th International SAMPE Symposium, p. 561 (2001).
16. H.K. Shobha, H. Johnson, M. Sankarapandian, Y.S. Kim, P. Rangarajan, D.G. Baird, and J.E. McGrath, "Synthesis of High Refractive Index Melt Stable Aromatic Polyphosphonates," Journal of Polymer Science, Part A: Polymer Chemistry, in press (2001).
17. F. Wang, M. Hicker, Y.S. Kim, J.E. McGrath, and T. Zawodzinski, "Synthesis and Characterization of Sulfonated Poly(arylene ether sulfone) Random (Statistical) Copolymers Via Direct Polymerization: Candidates for New Proton Exchange Membranes," Journal of Membrane Science, under review (2001).
18. Sheng Wang, Hong Zhuang, H. K. Shobha, T. E. Glass, M. Sankarapandian, Qing Ji, A. R. Shultz, J. E. McGrath, "On the Miscibility of Poly(arylene phosphine oxide) Systems and Bisphenol A Poly(hydroxy ether)." Macromolecules, 34, 8051-8063 (2001).
19. F. Wang, M. Hickner, Q. Ji, W. Harrison, J. Mecham, T.A. Zawodzinski, and J.E. McGrath, "Synthesis of highly sulfonated poly(arylene ether sulfone) random (statistical) copolymers via direct random polymerization," Macromol. Symp. 175 (2001), 387-396.
20. V.A. Bhanu, K. Wiles, P. Rangarajan, D.G. Baird, and J.E. McGrath, "Synthesis and Characterization of Melt Processible Carbon Fiber Precursors," 33rd International SAMPE Technical Conference: "Advancing Affordable Materials Technology," November 5-8, Vol. 33 p. 1499, (2001).
21. M.J. Sumner, M. Sankarapandian, J.E. McGrath, and J.S. Riffle "Synthesis and Physical Property Characterization of Novolac/Biphenoxyphthalonitrile Networks," 33rd International SAMPE Technical Conference: "Advancing Affordable Materials Technology," November 5-8, Vol. 33 p. 1509, (2001).
22. M. Hickner, Y.S. Kim, F.E. Wang, T.A. Zawodzinski, and J.E. McGrath, "Proton Exchange Membrane Nanocomposites for Fuel Cells," 33rd International SAMPE Technical Conference: "Advancing Affordable Materials Technology," November 5-8, Vol. 33 p. 1519, (2001).
23. F. Wang, M. Hickner, Y.S. Kim, T.A. Zawodzinski, and J.E. McGrath, "Direct Polymerization of Sulfonated Poly(arylene ether sulfone) Random (statistical) Copolymers: Candidates for New Proton Exchange Membranes," Journal of Membrane Science 197 (2002), 231-242.
24. P. Rangarajan, J. Yang, V. Bhanu, D. Godshall, J. McGrath, G. Wilkes and D. Baird. "Effect of Comonomers on Melt Processability of Polyacrylonitrile," Journal of Applied Polymer Science, 85(1), 69-83 (2002).
25. P. Rangarajan, V.A. Bhanu, D. Godshall, G.L. Wilkes, J.E. McGrath, and D.G. Baird, "Dynamic Oscillatory Shear Properties of Potentially Melt-Processable High Acrylonitrile Terpolymers," Polymer 43(9), 2699-2709 (2002).
26. A.E. Eichstadt, T.C. Ward, M.D. Bagwell, I.V. Farr, D.L. Dunson, and J.E. McGrath, "Structure-Property Relationships for a Series of Amorphous Partially Aliphatic Polyimides," Journal of Polymer Science, Part B: Polymer Physics, 40(14), 1503-1512 (2002).
27. A.E. Eichstadt, T.C. Ward, M. D. Bagwell, I.V. Farr, D.D. Dunson and J. E. McGrath, "Synthesis and Characterization of Amorphous Partially Aliphatic Polyimide Copolymers Based on Bisphenol-A Dianhydride," Macromolecules, 35(20), 7561-7568 (2002).
28. Paiva, M.C.; Lin, C.; Haynie, T.; Kotasthane, P.; Ogale, A.A.; Kennedy, J.M.; Edie, D.D.; McGrath, J.E.; Baird, D. "Carbon Fibers from Alternative Precursors," Carbon '01: An International Confernece on Carbon, Lexington, KY, July 14-19, 2001, 1288-1290 (2002).
29. P. Rangarajan, V.A. Bhanu, D. Godshall, G.L. Wilkes, J.E. McGrath, and D.G. Baird, "Dynamic Oscillatory Shear Properties of Potentially Melt Processable High Acrylonitrile Terpolymers," Polymer 43, 2699-2709 (2002).
30. V.A. Bhanu, P. Rangarajan, K. Wiles, M. Bornter, S. Sankarapandian, D. Godshall, T.E. Glass, A.K. Banthia, J. Yang, G. Wilkes, D. Baird, and J.E. McGrath, "Synthesis and Characterization of Acrylonitrile Methyl Acrylate Statistical Copolymers as Melt Processable Carbon Fiber Precursors," Polymer, 43, 4841-4850, (2002).
31. M.J. Sumner, M. Sankarapandian, J.E. McGrath, J.S. Riffle, and U. Sorathia, "Flame Retardant Novolac-Bisphthalonitrile Structural Thermosets," Polymer, Vol. 43. No. 19, p. 5069-5076 (2002).
32. D.M. Knauss and J.E. McGrath, "Polycarbonate networks. 1. Synthesis and characterization of vinylphenylcarbonate terminated oligomers," Polymer, 43 (24), pp. 6407-6414 (2002).
33. D.M. Knauss, T.H. Yoon, and J.E. McGrath, "Polycarbonate networks. Part 2. Cure study and determination of mechanical, adhesive, and crystallization properties," Polymer, 43 (25), pp. 7161-7170 (2002).
34. Y.S. Kim, J.S. Lee, Q. Ji, and J.E. McGrath, "Surface properties of fluorinated oxetane polyol modified polyurethane block copolymers," Polymer, 43 (24), pp. 6407-6414 (2002).
35. Y.S. Kim, J. Yang, S. Wang, A.K. Banthia, J.E. McGrath, "Surface and wear behavior of bis-(4-hydroxyphenyl) cyclohexane (bis-Z) polycarbonate/polycarbonate-polydimethylsiloxane block copolymer alloys," Polymer, 43 (24), pp. 7207-7217 (2002).
36. Bullions, T.A.; McGrath, J.E., and Loos, A.C. "Development of a Two-Stage, Dual-Arrhenius Rheology Model for a High Performance Phenylethynyl-Terminated Poly(etherimide)," Polymer Engineering and Science, 42(11), 2182-2192 (2002).
37. Bullions, T.A., McGrath, J.E.; and Loos, A.C. "Monitoring the Reaction Progress of a High-Performance Phenylethynyl-Terminated Poly(etherimide), Part I. Cure Kinetics Modeling, Polymer Engineering and Science, 42(5), 1056-1069 (2002).
38. Bullions, T.A.; Stoykovich, M.P.; McGrath, J.E.; and Loos, A.E. "Monitoring the Reaction Progress of a High-Performance Phenylethynyl-Terminated Poly(ether-imide). Part II. Advancement of a Glass Transition Temperature," Polymer Composites 23(4), 479-494, (2002).
39. Y.S. Kim, F. Wang, M. Hickner, T.A. Zawodzinski, and J.E. McGrath, "Fabrication and Characterization of Heteropolyacid (H3PW12O40)/Directly Polymerized Sulfonated Poly(arylene ether sulfone) Copolymer Composite Membranes for Higher Temperature Fuel Cell Applications," Journal of Membrane Science, 121 (1-2), 263-282 (2003).
40. W. Harrison, F. Wang, J.B. Mecham, V. Bhanu, M. Hill, Y.S. Kim, and J. E. McGrath, "Influence of Bisphenol Structure on the Direct Synthesis of Sulfonated Poly(arylene ether copolymers). 1," Journal of Polymer Science, Part A: Polymer Chemistry, (2003) Vol. 41, 2264-2276.
41. T.A. Bullions, A.C. Loos and J.E. McGrath, "Moisture Sorption Effects on and Properties of a Carbon Fiber-reinforced Phenylethynyl-terminated Poly(etherimide)," Journal of Composite Materials, Vol. 37, No. 9, p. 791 (2003).
42. M. A. Hickner, Y.S. Kim, F. Wang, W. Harrison, M. Hill, L. Dong, B. Pivovar, P. Zelenay and J.E. McGrath, "New Proton Exchange Membranes (PEM) for Direct Methanol Fuel Cells (DMFC)," Electrochimica Acta, 2003, in press.
43. Y.S. Kim, L. Dong, M. Hickner, T.E. Glass, and J.E. McGrath, "State of Water of Disulfonated Poly(arylene ether sulfone) Copolymers and a Perfluoro Sulfonic Acid Copolymer (Nafion) and Its Effect on Physical and Electrochemical Properties," Macromolecules, 36(17), 6281-6285 (2003).
44. D. Godshall, P. Rangarajan, D.G. Baird, G.L. Wilkes, V.A. Bhanu, and J.E. McGrath, "Incorporation of Methyl Acrylate in Acrylonitrile Based Copolymers: Effects on Melting Behavior," Polymer 44 (2003), 4221-4228.
45. Y.S. Kim, L. Dong, M. Hickner, B. Pivovar and J.E. McGrath, "Processing Induced Morphological Development in Hydrated Sulfonated Poly(arylene ether sulfone) Copolymer Membranes," Polymer, 44(19), 5729-5736 (2003).
46. Y.S. Kim, F. Wang, M. Hickner, S. McCartney, Y.T. Hong, T.A. Zawodzinski, and J.E. McGrath, "Effect of Acidification Treatment and Morphological Stability of Sulfonated Poly(Arylene Ether Sulfone)s for Proton Exchange Membranes at Elevated Temperature Operation of Fuel Cell," Journal of Polymer Science, Part B: Polymer Physics 41(22) (2003).
47. Muggli, M. W.; Ward, T. C.; Tchatchoua, C.; Ji, Q.; McGrath, J. E. End-group effect on physical aging and polymer properties for poly(ether sulfones). Journal of Polymer Science, Part B: Polymer Physics (2003), 41(22), 2850-2860.
48. Bullions, T. A.; McGrath, J. E.; Loos, A. C. Thermal-oxidative aging effects on the properties of a carbon fiber-reinforced phenylethynyl-terminated poly(etherimide). Composites Science and Technology (2003), 63(12), 1737-1748.
49. D.B. Baird, H.Huang, and J.E. McGrath, "Polymer Electrolyte Membrane Fuel Cells," Plastics Engineering, 59(12), 46-55, (2003).
50. Megan Andrew, T. Mukundan, and J.E. McGrath, "Sulfonated Poly(arylene ether sulfone) Copolymers - Acid and Salt Form: Potential Biofunctional Polymers," Journal of Bioactive and Compatible Polymer,, Vol. 19, p. 315-329 (2004).
51. Brian R. Einsla, Young-Taik Hong, Yu Seung Kim, Feng Wang, Nazan Gunduz, James E. McGrath, "Sulfonated naphthalene dianhydride based polyimide copolymers for proton-exchange-membrane fuel cells. I. Monomer and copolymer synthesis," Journal of Polymer Science Part A: Polymer Chemistry, Vol. 42 (4), pp. 862-874, 2004.
52. Yu Seung Kim, Michael A. Hickner, Limin Dong, Bryan S. Pivovar, and James E. McGrath, "Sulfonated Poly(Arylene Ether Sulfone) Copolymer Proton Exchange Membranes: Composition and Morphology Effects on the Methanol Permeability," Journal of Membrane Science, 243(1-2), 317-326, (2004).
53. M.J. Botrner, V.A. Bhanu, J.E. McGrath, and D.G. Baird, "Absorption of CO2 in High Acrylonitile Content Copolymers: Dependence on Acrylontilre Content," Polymer, 45 (2004), 3413-3422.
54. K.B. Wiles, V.A. Bhanu, A.J. Pasquale, T.E. Long, and J. E. McGrath, "Monomer Reactivity Ratios for Acrylonitrile-Methyl Acrylate Free-Radical Copolymerization," Journal of Polymer Science: Part A: Polymer Chemistry, Vol. 42, 2994-3001 (2004).
55. M.J. Summer, W.L. Harrison, R.M. Weyers, Y.S. Kim, J.E. McGrath, J.S. Riffle, A. Brink, M.H. Brink, "Novel Proton Conducting Sulfonated Poly(arylene ether) Copolymers Containing Aromatic Nitriles," J. Membr. Sci., 239(2), (2004), 199-211.
56. Michael J. Bortner, Vinayak Bhanu, James E. McGrath, and Donald G. Baird, "Shear Rheological Properties of Acrylic Copolymers and Terpolymers Suitable for Potentially Melt Processable Carbon Fiber Precursors," Journal of Applied Polymer Science, 93(6), 2856-2865 (2004).
57. H. Ghassemi and J.E. McGrath, "Synthesis and Properties of New Sulfonated Poly(p-Phenylene) Derivatives for Proton Exchange Membranes. I," Polymer, 45(17), (2004), 5847-5854.
58. H. Ghassemi, G. Ndip, and J.E. McGrath, "New Multiblock Copolymers of Sulfonated Poly(4'-Phenyl-2,5-Benzophenone) and Poly(Arylene Ether Sulfone) for Proton Exchange Membrane. II," Polymer, 45(17), (2004) 5855-5862.
59. Yu Seung Kim, Michael J. Sumner, William L.Harrison, Judy S. Riffle, James E. McGrath and Bryan S. Pivovar, "Direct Methanol Fuel Cell Performance of Disulfonated Poly(arylene ether benzonitrile) Copolymers" Journal of the Electrochemical Society, 151(2) A2150-A2156 (2004).
60. Hayley A. Every, Michael A. Hickner, James E. McGrath, Thomas A. Zawodzinski, Jr., An NMR Study of Methanol Diffusion in Polymer Electrolyte Fuel Cell Membranes, Journal of Membrane Science 250 (2005) 183-188.
61. Brian R. Einsla, Yu Seung Kim, Michael A. Hickner, Young-Taik Hong, Melinda L. Hill, Bryan S. Pivovar, James E. McGrath, Sulfonated Naphthalene Dianhydride Based Polyimide Copolymers for Proton-Exchange-Membrane Fuel Cells II. Membrane Properties and Fuel Cell Performance, Journal of Membrane Science 255 (2005) 141-148.
62. Harrison, W. L.; Hickner, M. A.; Kim, Y. S.; McGrath, J. E. Poly(arylene ether sulfone) copolymers and related systems from disulfonated monomer building blocks: synthesis, characterization, and performance - a topical review. Fuel Cells (Weinheim, Germany) (2005), 5(2), 201-212.
63. Wiles, K. B.; Wang, F.; McGrath, J. E. Directly copolymerized poly(arylene sulfide sulfone) disulfonated copolymers for PEM-based fuel cell systems. I. Synthesis and characterization. Journal of Polymer Science, Part A: Polymer Chemistry (2005), 43(14), 2964-2976.
64. Huang, J., Baird, D.G., McGrath, J.E. Development of fuel cell bipolar plates from graphite filled wet-lay thermoplastic composite materials. Journal of Power Sources (2005), 150, pp. 110-119.
65. Kim, Young Jun; Einsla, Brian R.; Tchatchoua, Charles, and McGrath, James E. Synthesis of high molecular weight polybenzoxazoles in polyphosphoric acid and investigation of their hydrolytic stability under acidic conditions. High Performance Polymers (2005), 17, 377-401.
66. Akle, B.J.; Leo, D.J.; Hickner, M.A.; McGrath, J.E. Correlation of capacitance and actuation in ionomeric polymer transducers. Journal of Materials Science (2005), 40(14), 3715-3724.
67. Hickner, M.; Kim, Y.; McGrath J.; Zelenay, P.; Pivovar, B. The effect of BPSH post treatment on DMFC performance and properties. Electrochemical Society (2005), 31(530-540).
68. Li, Yanxiang; Wang, Feng; Yang, Juan; Liu, Dan; Roy, Abhishek; Case, Scott; Lesko, Jack; McGrath, James E. Synthesis and characterization of controlled molecular weight disulfonated poly(arylene ether sulfone) copolymers and their applications to proton exchange membranes. Polymer 47 (2006), 4210-4217.
69. Mukundan, T.; Bhanu, V.A.; Wiles, K.B., Johnson, H.; Bortner, M.; Baird, D.G.; Naskar, A.K.; Ogale, A.A.; Edie, D.D.; McGrath J.E. A photocrosslinkable melt processible acrylonitrile terpolymer as carbon fibre precursor. Polymer 47 (2006), 4163-4171.
70. Wang, Hang; Badami, Anand S.; Roy, Abhishek; McGrath, James E. Multiblock copolymers of poly(2,5-benzophenone) and disulfonated poly(arylene ether sulfone) for proton-exchange membranes. I. Synthesis and characterization. Journal of Polymer Science, Part A: Polymer Chemistry (2006), Volume Date 2007, 45(2), 284-294.
71. Cho, Chang Gi; Kim, Yu Seung; Yu, Xiang; Hill, Melinda; McGrath, James E.. Synthesis and characterization of poly(arylene ether sulfone) copolymers with sulfonimide side groups for a proton-exchange membrane. Journal of Polymer Science, Part A: Polymer Chemistry (2006), 44(20), 6007-6014.
72. Roy, Abhishek; Hickner, Michael A.; Yu, Xiang; Li, Yanxiang; Glass, Thomas E.; McGrath, James E.. Influence of chemical composition and sequence length on the transport properties of proton exchange membranes. Journal of Polymer Science, Part B: Polymer Physics (2006), 44(16), 2226-2239.
73. Liu, Dan; Kyriakides, Steven; Case, Scott W.; Lesko, John J.; Li, Yanxiang; Mcgrath, James E. Tensile behavior of nafion and sulfonated poly(arylene ether sulfone) copolymer membranes and its morphological correlations. Journal of Polymer Science, Part B: Polymer Physics (2006), 44(10), 1453-1465.
74. Sankir, M.; Bhanu, V. A.; Harrison, W. L.; Ghassemi, H.; Wiles, K. B.; Glass, T. E.; Brink, A. E.; Brink, M. H.; McGrath, J. E.. Synthesis and characterization of 3,3'-disulfonated-4,4'-dichlorodiphenyl sulfone (SDCDPS) monomer for proton exchange membranes (PEM) in fuel cell applications. Journal of Applied Polymer Science (2006), 100(6), 4595-4602.
75. Brodd, R. J.; McGrath, J. E.; Moseley, P. T.; Editors. Special Issue: Polymer Batteries and Fuel Cells (PBFC-2). (Selected Papers Presented at the Second International Conference held 12-17 June 2005 in Las Vegas, Nevada.) [In: J. power Sources; 2006, 163(1)].
76. Brodd, Ralph J.; McGrath, James E. Preface. Journal of Power Sources (2006), 163(1), 1.
77. Hill, Melinda L.; Kim, Yu Seung; Einsla, Brian R.; McGrath, James E.. Zirconium hydrogen phosphate/disulfonated poly(arylene ether sulfone) copolymer composite membranes for proton exchange membrane fuel cells. Journal of Membrane Science (2006), 283(1+2), 102-108.
78. Ghassemi, Hossein; McGrath, James E.; Zawodzinski, Thomas A. Multiblock sulfonated-fluorinated poly(arylene ether)s for a proton exchange membrane fuel cell. Polymer (2006), 47(11), 4132-4139.
79. McGrath, James E.; Rasmussen, Lenore; Shultz, Albert R.; Shobha, H. K.; Sankarapandian, M.; Glass, Tom; Long, Tim E.; Pasquale, Anthony J. Novel carbazole phenoxy-based methacrylates to produce high-refractive index polymers. Polymer (2006), 47(11), 4042-4057.
80. Wang, Hang; Badami, Anand S.; Roy, Abhishek; and McGrath, James E. Multiblock copolymers of poly(2,5-benzophenone) and disulfonated poly(arylene ether sulfone) for proton exchange membranes. I. Synthesis and characterization. Journal of Polymer Science: Part A: Polymer Chemistry (2007), Vol. 45 284-294.
81. Y. Li, A. Roy, A. S. Badami, M. Hill, J. Yang, S. Dunn, J. E. McGrath, Synthesis and Characterization of Partially Fluorinated Hydrophobic - Hydrophilic Multiblock Copolymers Containing Sulfonate Groups for Proton Exchange Membrane, Journal of Power Sources, 2006 Submitted.
82. Lee, Hae-Seung; Roy, Abhishek; Badami, Anand S.; McGrath, James E. Synthesis and characterization of sulfonated poly(arylene ether) polyimide multiblock copolymers for proton exchange membranes. Macromolecular Research (2007), 15(2), 160-166.
83. McGrath, James E.; Roy, Abhishek; Lee, Hae-Seung; Yu, Xiang; Badami, Anand; Li, Yanxiang; Wang, Hang. Multiblock hydrophilic-hydrophobic proton exchange membranes for direct methanol based fuel cell. ECS Transactions (2007), 2(24, Direct Methanol Fuel Cells), 55-62.
84. Roy, Abhishek; Hickner, Michael A.; Lee, Hae-Seung; Badami, Anand; Yu, Xiang; Li, Yanxiang; Glass, Tom; McGrath, James E.. Transport properties of proton exchange membranes. ECS Transactions (2007), 2(24, Direct Methanol Fuel Cells), 45-54.
85. Sankir, M.; Kim, Yu Seung; Pivovar, Bryan S.; McGrath, James E. Proton exchange membrane for DMFC and H2/air fuel cells: Synthesis and characterization of partially fluorinated disulfonated poly(arylene ether benzonitrile) copolymers. Journal of Membrane Science (2007), 299(1+2), 8-18.
86. Wiles, K. B.; Akle, B. J.; Hickner, M. A.; Bennett, M.; Leo, D. J.; McGrath, J. E.. Directly Copolymerized Poly(arylene sulfide sulfone) and Poly(arylene ether sulfone) Disulfonated Copolymers for Use in Ionic Polymer Transducers. Journal of the Electrochemical Society (2007), 154(6), P77-P85.
87. Wiles, K. B.; De Diego, C. M.; De Abajo, J.; McGrath, J. E.. Directly copolymerized partially fluorinated disulfonated poly(arylene ether sulfone) random copolymers for PEM fuel cell systems: Synthesis, fabrication and characterization of membranes and membrane-electrode assemblies for fuel cell applications. Journal of Membrane Science (2007), 294(1+2), 22-29.
88. Lee, Hae-Seung; Badami, Anand S.; Roy, Abhishek; and McGrath, James E. Segmented Sulfonated Poly(arylene ether sulfone)-b-Polyimide Copolymers for Proton Exchange Membrane Fuel Cells. I. Copolymer Synthesis and Fundamental Properties. Journal of Polymer Science: Part A: Polymer Chemistry. (2007).Vol. 45, 4879-4890.
89. Li, Yanxiang; Roy, Abhishek; Badami, Anand S.; Hill, Melinda; Yang, Juan; Dunn, Stuart; McGrath, James E. Synthesis and characterization of partially fluorinated hydrophobic-hydrophilic multiblock copolymers containing sulfonate groups for proton exchange membrane. Journal of Power Sources (2007), 172(1), 308.
90. Huang, J.; Baird, D. G.; Fan, G.; Zhang, Z.; Badami, A.; Takamuku, S.; McGrath, J. E. Continuous film casting and evaluation of novel polymer membranes for fuel cells. Annual Technical Conference - Society of Plastics Engineers (2007), 65th 2292-2296.
91. Arnett, Natalie Y.; Harrison, William L.; Badami, Anand S.; Roy, Abhishek; Lane, Ozma; Cromer, Frank; Dong, Limin; McGrath, James E. Hydrocarbon and partially fluorinated sulfonated copolymer blends as functional membranes for proton exchange membrane fuel cells. Journal of Power Sources (2007), 172(1), 20-29.
92. Borup, Rod; McGrath, James E.; et al. Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation. Chemical Reviews No. 107(10), 3904-3951 (2007).
93. Robeson, Lloyd M.; Hwu, Henry H.; McGrath, James E. Upper bound relationship for proton exchange membranes: Empirical relationship and relevance of phase separated blends. Journal of Membrane Science (2007), 302(1+2), 70-77.
94. Akle, Barbar J.; Bennett, Matthew D.; Leo, Donald J.; Wiles, Kenton B.; McGrath, James E. Direct assembly process: a novel fabrication technique for large strain ionic polymer transducers. Journal of Materials Science (2007), 42(16), 7031-7041.

| back to top |

1990 - 1999

1. H. C. Kim, A. M. El-Naggar, G. L. Wilkes, Y. Yoo, and J. E. McGrath, "Structure Property Behavior of Caprolactone-Allyl Glycidyl Ether Copolymers Crosslinked by Electron Beam Irradiation," ACS Symposium Series No. 417, Chapter 33, Radiation Curing of Polymeric Materials; C. E. Hoyle and J. F. Kinstle, Eds; 1990.
2. G. Sinai-Zingde, A. Verma, Q. Liu, A. Brink, J. Bronk, D. Allison, A. Goforth, N. Patel, H. Marand, J. E. McGrath, and J. S. Riffle, "Polyoxazoline Containing Copolymers Useful as Emulsifiers for Polymer Blends;" ACS National Meeting, Ring Opening Symposium, Boston, MA, Polymer Preprints, 31(1), 63-65 (1990).
3. J. M. DeSimone, M. Stangle, J. S. Riffle, and J. E. McGrath, "Aluminum-27 NMR Studies of Aluminum Porphyrins;" ACS National Meeting, Ring Opening Symposium, Boston, MA, Polymer Preprints, 31(1), 72 (1990).
4. Y. Yoo and J. E. McGrath, "Synthesis of Primary Hyrdoxyl Functional Polypropylene Oxide of Controlled Molecular Weight by Direct Polymerization;" ACS National Meeting, Ring Opening Symposium, Boston, MA, Polymer Preprints, 31(1), 77 (1990).
5. J. L. Hedrick, J. E. Economy, J. C. Scott, A. Yang, and J. E. McGrath, "Novel High Temperature Elastomers: Poly(Aryl Ether Ketones);" ACS National Meeting, Ring Opening Symposium, Boston, MA, Polymer Preprints, 31(1), 444 (1990).
6. C. Senger Elsbernd, J. M. DeSimone, A. M. Hellstern, S. D. Smith, P. M. Gallagher, V. J. Krukonis, and J. E. McGrath, "The Application of Supercritical Fluids in the Fractionation and Characterization of Siloxane Oligomers and Graft Copolymers;" ACS National Meeting, Ring Opening Symposium, Boston, MA, Polymer Preprints, 31(1), 673 (1990).
7. S. C. Liptak, S. P. Wilkinson, J. C. Hedrick, W. D. Joseph, T. C. Ward, and J. E. McGrath, "Electromagnetic Radiation Effects on Terminally Reactive and Non-Reactive Engineering Polymer Systems;" ACS National Meeting, Washington, DC, Polymer Preprints, August 26-31, 31(2), 320 (1990).
8. J. E. McGrath, R. 0. Waldbauer, A. Gungor, Y. Kim, and M. E. Rogers, "Advances in Solution Imidization Processing;" ACS National Meeting, Washington, Polymer Preprints, August 26-31, 31(2), 432 (1990).
9. J. E. McGrath, K. L. Cooper, W. Waehamad, C. A. Arnold, M. Rogers, and G. A. York, "High Performance Segmented Multiphase Copolymers;" ACS National Meeting, Boston, MA, PMSE Preprints, 62, 595 (1990).
10. J. E. McGrath, J. C. Hedrick, J. L. Hedrick, J. A. Cecere, and S. C. Liptak, "An Overview on the Toughening of Epoxy Resin Networks with Functionalized Engineering Thermoplastics;" ACS National Meeting, Washington, PMSE Preprints, August 26-31, 63, 190 (1990).
11. B. Wang, H. Huang, G. L. Wilkes, S. Liptak, and J. E. McGrath, "New High Refractive Index Organic/Inorganic Hybrid Materials from Titanium Tetraisopropoxide and Functionalized Poly(Arylene Ether Sulfone) Prepared by the Sol Gel Processing;" ACS National Meeting, Washington, PMSE Preprints, August 26-31, 63, 892 (1990).
12. B. D. Nahlovsky, J. G. Hargis, A. L. Ratermann, and J. E. McGrath, "Structure-Property Relationships for Polyethylene Block Copolymers;" Rubber Division, ACS Meeting, Las Vegas, NV, May 29-June 1, 1990.
13. J. E. McGrath, "Synthesis of Block, Graft, Segmented, and Ion-Containing Copolymers;" Rubber Division, ACS Meeting, Las Vegas, NV, May 29-June 1, 1990.
14. J. M. DeSimone, A. M. Hellstern, A. C. Nielsen, M. Sheridan, E. J. Siochi, T. C. Ward, and J. E. McGrath, "All Acrylic Single and Multiphase Model Graft Polymers Via the Macromonomer Method;" Rubber Division, ACS Meeting, Las Vegas, NV, May 29-June 1, 1990.
15. J. C. Hedrick, C. A. Arnold, M. A. Zumbrum, T. C. Ward, and J. E. McGrath, "Poly(Arylene Ether Ketone)/Poly(Aryl Imide) Homo- and Polydimethylsiloxane Segmented Copolymer Blends: Influence of Chemical Structure on Miscibility and Physical Property Behavior," SAMPE Proceedings (Anaheim), 35(1), 82-96 (1990).
16. T. H. Yoon, C. A. Arnold, and J. E. McGrath, "Effect of Molecular Weight and End Group Control on the Adhesion Behavior of Thermoplastic Polyimides and Poly(Imide Siloxane) Segmented Copolymers," SAMPE Proceedings (Anaheim), 35(1), 1892-1904 (1990).
17. G. A. York, R. 0. Walbauer, C. A. Arnold, M. E. Rogers, A. Gungor, David Rodrigues, G. L. Wilkes, and J. E. McGrath, "Investigation of the Morphological Structure and Physical Behavior of High Tg Polyimide Thermoplastic Homopolymers and Siloxane Segmented Copolymers," SAMPE Proceedings (Anaheim), 35(1), 579-589 (1990).
18. R. O. Waldbauer, M. E. Rogers, C. A. Arnold, G. A. York, and J. E. McGrath, "Synthesis of Soluble, Melt Processible Polyimides of Controlled Structure," SAMPE Proceedings (Anaheim), 35(1), 97-107 (1990).
19. C. D. Smith, D. K. Mohanty, and J. E. McGrath, "Synthesis and Characterization of Poly(Arylene Ether Phosphine Oxides)s," SAMPE Proceedings (Anaheim), 35(1), 108-122 (1990).
20. C. D. Smith, H. J. Grubbs, H. F. Webster, J. P. Wightman and J. E. McGrath, "Poly(arylene Ether Phosphine Oxide)s I. Overview of Chemistry, Thermal Stability and Oxygen Plasma Resistance", ACS National Meeting, New York, NY, Polymeric Materials and Science Engineering, 65, 108-110 (1991).
21. H. J. Grubbs, C. D. Smith and J. E. McGrath, "Poly(arylene Ether Phosphene Oxide)s II. Pyrolysis Studies", ACS National Meeting, New York, NY, Polymeric Materials and Science Engineering, 65, 111-112 (1991).
22. H. F. Webster, C. D. Smith, J. E. McGrath and J. P. Wightman, "Poly(arylene Ether Phosphene Oxide)s III. XPS Analysis of the Surface Modification by Oxygen Plasma Treatment", ACS National Meeting, New York, NY, Polymeric Materials and Science Engineering, 65, 113-114 (1991).
23. K. R. Lyon and J. E. McGrath, "Semicrystalline Poly(Arylene Sulfide) Ketones via Amorphous Ketimine Intermediates", ACS National Meeting, New York, NY, Polymeric Materials and Science Engineering, 65, 249-250 (1991).
24. A. Gungor, C. D. Smith, J. Wescott, S. Srinivasan and J. E. McGrath, "Synthesis of Fully Imidized Phosphorous-Containing Soluble Polyimides," Polymer Preprints, 32(1), 172-173 (1991).
25. Y. J. Kim, G. D. Lyle and J. E. McGrath, "Kinetic Investigations of Solution Imidization," Polymer Preprints, 32(1), 91-92 (1991).
26. M. E. Rogers, D. Rodrigues, G. L. Wilkes and J. E. McGrath, "Synthesis and Characterization of Perfectly Alternating Segmented Polyimide Copolymers," Polymer Preprints, 32(1), 176-177 (1991).
27. C.D. Smith, A. Gungor, K.M. Keister, H.A. Marand and J.E. McGrath, "Poly(Arylene Ether Ketone)-Poly(Arylene Ether Phosphine Oxide) Copolymer and Blend Compositions," Polymer Preprints, 32(1), 93-95 (1991).
28. R. Srinivasan, A. Prasad, H. Marand and J. E. McGrath, "Polyamides Based on Cyclohexane-dicarboxylic Acid," Polymer Preprints, 32(1), 174-175 (1991).
29. J. E. McGrath, H. Grubbs, M. E. Rogers, R. Mercier, W. A. Joseph, W. Alston, D. Rodriguez, and G. L. Wilkes, "Polymeric Materials Systems Designed for 700?F Applications," Polymer Preprints, 32(2), 103-105 (1991).
30. B. Wang, A. Gungor, A. B. Brennan, D. E. Rodrigues, J. E. McGrath and G. L. Wilkes, "New Ceramer Materials with Emphasis on High Refractive Index and Abrasion Resistance Coatings," Polymer Preprints, 32(3), 521 (1991).
31. L. Carman, A. Verma, J. Riffle and J. E. McGrath, "Selected Functionalizations of Living Poly(Tetramethylene oxide) to Produce Novel Telechelic Poly(tetramethylene oxide)", Fourteenth Annual Adhesion Meeting, 1991, Clearwater, Florida, February 17-20, 1991, page 56, 1991, Library of Congress Number 90-84605.
32. T. H. Yoon, R. O. Waldbauer, M. Roger and J. E. McGrath,"High Performance Thermoplastic Polyimide Adhesives", Fourteenth Annual Adhesion Meeting, 1991, Clearwater, Florida, February 17-20, 1991, page 57, 1991, Library of Congress Number 90-84605.
33. S. P. Wilkinson, S. C. Liptak, P. A. Wood, J. E. McGrath and T. C. Ward, "Reactive Blends of Amorphous Functionalized Engineering Thermoplastics and Bismaleimide/Diallyl Bisphenol-A Resins",Fourteenth Adhesion Annual Meeting, 1991, Clearwater, Florida, February 17-20, 1991, pages 68-70, 1991, Library of Congress Number 90-84605.
34. W. D. Joseph, R. Mercier, H. Grubbs, A. Prasad, H. Marand, A. Brennan and J. E. McGrath, "Synthesis of Soluble Polybenzoxazoles Via Acid Catalyzed Solution Cyclization," SAMPE (Anaheim), 37, 654-666, (1992).
35. S. C. Liptak, A. Gungor, T. C. Ward, and J. E. McGrath, "Microwave and Thermal Processing of Phosphorus Containing Polysulfone Modified Epoxy Resin Networks", PMSE, 66, 387-388, (1992).
36. R. M. Davis, A. Texier, T. H. Yu, K. R. Lyon, A. Gungor, J. E. McGrath and J. S. Riffle, "Fabrication of Carbon Fiber Composites by Aqueous Suspension Prepregging with Thermoplastic Particles," Polymer Preprints, 33(1), 416-417 (1992).
37. T. Lin, K. Stickney, M. Rogers, J. S. Riffle, J. E. McGrath and H. Marand, "The Formation of Sub-micron Polyimide Particles for Composite Applications," Polymer Preprints, 33(1), 445-446 (1992).
38. W. D. Joseph, R. Mercier, A. Prasad, H. Marand and J. E. McGrath, "Synthesis of Bis-A Based Polybenzoxazoles via Acid-catalyzed Solution Cyclization," Polymer Preprints, 33(1) , 501-502 (1992).
39. T. M. Moy, C. D. DePorter, and J. E. McGrath, "Synthesis of Soluble Polyimides and Functionalized Imide Oligomers Via Solution Imidization of Aromatic Diester-Diacids and Aromatic Diamines", Polymer Preprints, 33(1), 489-490 (1992).
40. M. E. Rogers, M. H. Woodard, A. Brennan, P. M. Cham, H. Marand, and J. E. McGrath, "Semicrystalline and Amorphous Fluorine Containing Polyimides", Polymer Preprints, 33(1), 461-462 (1992).
41. R. Srinivasan and J. E. McGrath, "High Performance Amorphous Polyamides Via Direct Solution Polymerization of Cyclohexane Dicarboxylic Acid and Aromatic Diamines", Polymer Preprints, 33(1), 503-504 (1992).
42. M. S. Sheridan, A. Verma, and J. E. McGrath, "Synthesis of Well Defined All Acrylic Graft Copolymers", Polymer Preprints, 33(1), 904-905 (1992).
43. D. Knauss, T. Yamamoto, and J. E. McGrath, "Synthesis of Hydrolytically Stable Polydimethylsiloxane-Bisphenol A Polycarbonate Segmented Copolymers", Polymer Preprints, 33(1), 988-989 (1992).
44. S. Kalachandra, D. F. Taylor, C. D. DePorter, H. J. Grubbs, and J. E. McGrath, "Polymeric Materials for Composite Matrices in Biological Environments", Polymer Preprints, 33(1), 467-468 (1992).
45. S. P. Wilkinson, S. C. Liptak, J. E. McGrath and T. C. Ward, "Reactive Blends of Amorphous Functionalized Engineering Thermoplastics and Bismaleimide/Diallyl Bisphenol-A Resins for High Performance Composite Matrices", Polymer Preprints, 33(1), 424-425 (1992).
46. T. Lin, H. Marand, K. Lyon, J. E. McGrath, and J. S. Riffle, "Synthesis of Poly(ether ether ketimine) and Subsequent Hydrolysis to Crystalline Poly(ether ether ketone) Submicron Particles", A. E. Brink, S. Gutzeit, Polymer Preprints, 33(1), 402-403 (1992).
47. C. L. Heisey, P. A. Wood, J. E. McGrath, and J. P. Wightman, "Characterization and Carbon Fiber Adhesion of a Novel Bismaleimide Containing Phosphine Oxide", Fifteenth Adhesion Annual Meeting, Hilton Head, South Carolina, February 16-19, 1992, pgs. 60-62, Library of Congress Number 92-70209.
48. . L. Wolfe, J. G. Dillard, J. E. McGrath, and A. Gungor, "Adhesive Bonding of Phosphine Oxide Polymide Polymers to Aluminum", KFifteenth Adhesion Annual Meeting, Hilton Head, South Carolina, February 16-19, 1992, pgs. 81-82, Library of Congress Number 92-70209.
49. T. Park, C. Smith, J. E. McGrath, and T. C. Ward, "Thermal Degradation Behavior of Poly(Arylene Ether Phosphine Oxide)s", Fifteenth Adhesion Annual Meeting, Hilton Head, South Carolina, February 16-19, 1992, pgs. 86-88, Library of Congress Number 92-70209.
50. T. H. Yoon, Y. J. Lee, A. Gungor, C. Smith, and J. E. McGrath, "Adhesion Study of Phosphorous Containing Polyimides and Polyethers", Fifteenth Adhesion Annual Meeting, Hilton Head, South Carolina, February 16-19, 1992, pgs. 200-202, Library of Congress Number 92-70209.
51. Srinivasan, S.A., Lyle, G.D. and McGrath, J.E., "Amorphous Poly(arylene ether ketone) Toughened Cyanate Ester Networks," 38th International SAMPE Symposium, May 10-13, 1993.
52. McGrath, J.E. and Srinivasan, S.A., "Molecular Design of high Performance Polymeric Material Matrix Resins and Structural Adhesives: Polyarlene Ethers as Toughness Modifiers for Cyanide Ester Networks," ICCM IX, Madrid, Spain, 875, July 1993.
53. Heisey, C.L., Wood, P.A., McGrath, J.E., and Wightman, J.P., "Carbon Fiber Adhesion of a Novel Bismaleimide," Adhesion Society 16th Annual Meeting, 126-128, Williamsburg, Virginia, 1993.
54. Yoon, T.H., Liptak, S.C., Ngassa, C.T., and McGrath, J.E., "Adhesive and Mechanical Properties of Reactive Polysulfone Modified Epoxy Resins," Adhesion Society 16th Annual Meeting, 257-259, Williamsburg, Virginia, 1993.
55. Knauss, D.M., Srinivasan, S.A., Yoon, T.H., and McGrath, J.E., "Styrene Terminated Bisphenol A Polycarbonate Oligomers- Precursors to Novel Structural Adhesives," Adhesion Society 16th Annual Meeting, 264-266, Williamsburg, Virginia, 1993.
56. Sheridan, M.S., Verma, A.,Yoon, T.H., and McGrath, J.E., "Hydrogenated Polybutadiene Based Adhesive Systems for Polypropylene," Adhesion Society 16th Annual Meeting, 283-286, Williamsburg, Virginia, 1993.
57. Srinivasan, S.A. and McGrath, J.E., "Toughened Cyanate Ester Resin Networks," Adhesion Society 16th Annual Meeting, 407-408, Williamsburg, Virginia, 1993.
58. Wescott, J.M., Yoon, T.H., Kiefer, L., Rodrigues, D., Konas, M., Wilkes, G.L. and McGrath, J.E., "Synthesis and Characterization of Triphenyl Phosphine Oxide Containing Polyimide-Polydimethyl Siloxane Segmented Copolymers," Polymer Preprints, 34(1), 308-309, (1993).
59. Priddy, D.B., Jr., Franks, M., Konas, M., Vrana, M.A., Yoon, T.H., and McGrath, J.E., "Poly(arylene ether)s Containing Phosphorous and Hetercyclic Pendant Moieties," Polymer Preprints, 34(1), 310-311, (1993).
60. Brink, M.H., Brandom, D.K., Wilkes, G.L., and McGrath, J. E., "Novel Semicrystalline Fluorinated Polyimides Based on Trifluoroacetophenone," Polymer Preprints, 34(1), 391-392, (1993).
61. Joseph, W.D., Abed, J.C., Mercier, R., and McGrath, J.E., "Synthesis and Characterization of Fluorinated Polybenzoxazoles via Solution Cyclization Techniques," Polymer Preprints, 34(1), 397-398, (1993).
62. Jayaraman, S., Srinivasan, R. and McGrath, J.E., "Synthesis of 3-PhenylEthynyl Phenol," Polymer Preprints, 34(1), 511-512, (1993).
63. Jayaraman, S., Lyle, G., Moy, T.M., Srinivasan, R., and McGrath, J.E., "Synthesis and Characterization of 3-PhenylEthynyl Endcapped Matrix Resins," Polymer Preprints, 34(1), 513-514, (1993).
64. Lin, Y.N., Joardar, S., and McGrath, J.E., "Synthesis of Triphenyl Phosphine Oxide Dianhydride Monomer and High Tg Soluble Polyimides," Polymer Preprints, 34(1), 515-516, (1993).
65. Lents, G., Lyon, K., Smith, S. Weber, M., Rodrigues, D., G.L. Wilkes, and McGrath, J.E., "Synthesis and Characterization of Amorphous and Semicrystalline Poly(arylene ether ketone)-b-poly(dimethylsiloxane) Block Copolymers" Polymer Preprints, 34(1), 578-580, (1993).
66. Sekharipuram, V.N., Lyle, G.D., and McGrath, J.E., "Titrimetric Characterization of Soluble High Performance Poly(amide-imides)," Polymer Preprints, 34(1), 618-620, (1993).
67. Sekharipuram, V.N., Vrana, M.A., Joardar, S.S., Konas, M., Shultz, A.R., Ward, T.C., and McGrath, J.E., "Molecular Weight Characterization of Poly(Amide-Imides)," Polymer Preprints, 34(1), 620-622, (1993).
68. Wan, I.Y., Priddy, D.B., Lyle, G.D., and McGrath, "Linear and Star-Branched Poly(arylene arylene ether)s via Silynated Intermediates," Polymer Preprints, 34(1), 806-809, (1993).
69. Hill, D.T., Hopewell, J.L., O'Donnell J.H., McGrath, J.E., Priddy, D.B., and Smith, C.D., "The Radiation Chemistry of Poly(Arylene Ether Phosphine Oxide)s," Polymer Preprints, 34(2), 195-196, (1993).
70. Risch, B.G., Wan, I.Y., McGrath, J.E., and Wilkes, G.L., "Generation of Novel Liquid Crystalline Foams via a Gas Supersaturation Technique," Polymer Preprints, 34(2), 440-442, (1993).
71. Lakshmanan, P., Srinivasan, S., Moy, T., McGrath, J.E., "Synthesis and Characterization of Hydroxyl Terminated Oxydiphthalic Anhydride- Bis-Aniline P Soluble, Fully Cyclized Polyimides," Polymer Preprints, 34(2), 442-443, (1993).
72. Kranbuehl, D.E., Kim, T.J., Liptak, S.C., and McGrath, J.E., "In Situ Monitoring of Phase Inversion in a Thermoplastic Toughened Thermoset," Polymer Preprints, 34(2), 488-489, (1993).
73. Meyer, G.W., Jayaraman, S. and McGrath, J.E., "Synthesis and characterization of Soluble, High Temperature 3-Phenylethynyl Aniline Functionalized Polyimides Via the Ester-Acid Route," Polymer Preprints, 34(2), 540-541, (1993).
74. DePorter, C.D., Ferrence, G.M., and McGrath, J.E., "Synthesis of ABA and ABCBA Block Ionomers Derived From t-Butyl Methacrylate, Butadiene and Styrene," Polymer Preprints, 34(2), 574-575, (1993).
75. Knauss, D.M., Yamamoto, T., and McGrath, J.E., "Synthesis and Characterization of New Phenol Functionalized Siloxane Oligomers and the Respective Polycarbonate Copolymers," Polymer Preprints, 34(2), 622-623, (1993).
76. Mecham, S.J., Rogers, M.E., Kim, Y., and McGrath, J.E., "Gas Permeability of High Performance Homo-and Co-Polmers," Polymer Preprints, 34(2), 628-629, (1993).
77. Rogers, M.E., and McGrath, J.E., "Perfectly Alternating Segmented Polyimide Siloxane Copolymers," Polymer Preprints, 34(2), 644-645, (1993).
78. Abed, J.C. and McGrath, J.E., "Arylene Ether Cyanate Ester Networks," Polymeric Materials Science and Engineering, 69, 291-293, (1993).
79. Lyle, G.D., Grubbs, H., Tchatchoua, C., and McGrath, J.E., "Synthesis and Characterization of Poly(Arylene Ether)s Derived From 1,1-Bis-(4-Hydroxyphenyl)-1-Phenyl-2,2,2-Trifluroethane," Polymeric Materials Science and Engineering, 69, 238-240, (1993).
80. Lin, J.E. McGrath, "Free Radical Homopolymerization and Copolymerization of Diphenyl-2-Propenylphosphine Oxide," Polym. Prepr. 35(1) 821 (1994).
81. Meyer, T.E. Glass, H.J. Grubbs, and J.E. McGrath, "Synthesis and Characterization of Polyimides Endcapped with a Novel Phenylethynyl Endcapping agent," Polym. Prepr. 35(1) 549 (1994).
82. Jayaraman, S. Srinivas, G.L. Wilkes, and J.E. McGrath, "High Tg Polyimide Nanofoams Derived from Pyromellitic Dianhydride and 1,1-Bis(40Aminophenyl)-1-Phenyl-2,2,2-Trifluromehtane," Polym. Prepr. 35(1) 347 (1994).
83. W.D. Joseph, J.C. Abed, T.H. Yoon, and J.E. McGrath, "Synthesis and Characterization of Phenylethynyl Terminated Fluorinated Polybenzoxazoles," Polym. Prepr. 35(1) 551 (1994).
84. E. Bonaplata, D.C. Priddy, Jr., C.D. Smith and J.E. McGrath, "Polymer metal Composites: Complexation of Metal Salts with the Phosphorus Oxygen Bond in Poly(arylene Ether Phosphine Oxide)s" PMSE Prepr. 70,405(1994).
85. G. W. Meyer, Y.J. Lee, S.J. Pak, and J.E. McGrath, "New High Performance Thermosetting Polymer Matrix Material Systems," PMSE Prepr. 70 496 (1994).
86. S. A. Srinivasan, S. S. Joardar, D. B. Priddy, Jr., T. C. Ward and J. E. McGrath,"Amorphous Phenolphthalein Based Poly(arylene ether)s as Toughness Modifiers for Cyanate Ester Networks," PMSE Prepr. 70 93 (1994).
87. V. N. Sekharipuram, I.-Y. Wan, S. S. Joardar, T. C. Ward and J. E. McGrath,"Melt-Processible, High Molecular Weight Poly(amide-imides), PMSE Prepr. 70, 402 (1994).
88. D. M. Knauss, T. Kashiwagi, J. E. McGrath, "Copolycarbonates Containing Hydrolytically Stable Phosphine Oxide Comonomers," PMSE Prepr. 71, 229 (1994).
89. I.Y. Wan, T. Kashiwagi, J. E. McGrath, "Synthesis, Characterization, and Flame Retarancy Behavior of Triaryl Phosphone Oxide Containing Nylon 6,6 Copolymer," PMSE Prepr. 71, 233 (1994).
90. S. Srinivasan, A. V. Rau, A. C. Loos, J. E. McGrath, "Toughened Cyanate Ester Networks as Matrix Resin for Carbon Fiber Composites," PMSE Prepr, 71, 750 (1994).
91. D. S. Porter, J. M. Cartwright, S. A. Srinivasan, J. E. McGrath, and T. C. Ward, "Control of Toughened Polycyanurate Morphology Using in situ Monitoring and Gradient Temperature Curing," PMSE Prepr. 71, 817 (1994).
92. M. F. Martinez-Nunez, V. N. Sekharipuram, J. E. McGrath, "Synthesis and Characterization of Polyimides Using a Novel Phosphorus-Containing Diamine," POLY Prepr. 35(2), 709 (1994).
93. V. N. Sekharipuram, R. S. Srinivasan, J. E. McGrath, "Synthesis of Poly(amide-imides) by the simultaneous Catalytic Amidation and Imidization of o-ester acids," POLY Prepr. 35(2) 711 (1994).
94. P. Lakshmanan, J. E. McGrath, K. Carter, J. Labadie, "Synthesis and Characterization of Polyimide-Propylene Oxide Block Copolymers for Microelectronic Applications," POLY Prepr. 35(2) 713 (1994)
95. S. J. Mecham, V. N. Sekharipuram, M. E. Rogers, G. W. Meyer, Y. J. Kim, J. E. McGrath, "Gas Permeability of Polyimide/Poly(Dimethylsiloxane) Block Copolymers," POLY Prepr. 35(2) 803 (1994).
96. J. E. McGrath, M. S. Sheridan, "Synthesis and Swelling Behavior of Poly(N,N-dimethylacrylamide-g-HPBd) Copolymers," POLY Prepr. 35(2) 476 (1994).
97. J. C. Abed, A. Jayaraman, P. Lakshmanan, M. Sanchez, J. Labadie, J. E. McGrath, "Synthesis and Characterization of Bothe Thermally Cyclized Polybenzoxazole and Polybenzoxazole-Propylene Oxide Block and Graft Copolymers," POLY Prepr. 35(2) 830 (1994).
98. S. S. Joardar, A. Srinivasan, D. B. Priddy Jr., J. E. McGrath, T. C. Ward, "Microwave Processing of Thermoplastic Modified Cyanate Esters," POLY Prepr. 35(2) 967 (1994).
99. Zhuang, H., Oyama, H., Bucher, R., Hochella, M., Lesko, J., Loos, A., McGrath, J., Reifsnider, K. and Wightman, J., "Pretreatment of Carbon Fibers: Surface Characterization and Effect on Fiber/Matrix Interfacial Adhesion and Composite Properties," PMSE Preprint, Spring ACS Anaheim Meeting, (1995).
100. Chen, M., Hellgeth, J. W., Ward, T. C. and McGrath, J. E., "Microwave Processing of two-Phase Systems: Composites and Polymer Blends," PMSE Prepring, Spring ACS 35(2), 144-150, (1995).
101. H. Yang, M.E. Rogers, and J.E. McGrath, "Synthesis of Novel Phosphine Containing Polyimides with Very High Glass Transition Temperatures," POLY Prep. 36(1), 205 (1995).
102. I.Y. Wan, D.B. Priddy, Jr. and J.E. McGrath, "Poly(arylene ethers): Homo- and Copolymers from Halogenophenols, Activated Dihalides and Deactivated Bisphenols," POLY Prep. 36(1), 207 (1995).
103. I.Y. Wan, L.A. Keifer, and J.E. McGrath, "Aryl Phosphine Oxide Containing Poly(ethylene Terephthalate) Copolymers, POLY Prep. 36(1), 491 (1995).
104. I.Y. Wan and J.E. McGrath, "Synthesis and Characterization of Diphenyl Methyl Phosphine Oxide Containing Nylon 6,6 Copolymers," POLY Prep. 36(1), 493 (1995).
105. R.A. Bucher, A.C. Loos, G.W. Meyer and J.E. McGrath, "Thermoplastic Dry Polymer Powder Prepregging," POLY Prep. 36(1), 775 (1995).
106. D.M. Knauss, T.H. Yoon, J.B. Mecham, and J.E. McGrath, "Thermosetting Polycarbonate Matrix Resins and Structural Adhesives," POLY Prep. 36(1), 785 (1995).
107. Zhuang, H., Oyama, H., Bucher, R., Hochella, M., Lesko, J., Loos, A., McGrath, J., Reifsnider, K. and Wightman, J., "Pretreatment of Carbon Fibers: Surface Characterization and Effect on Fiber/Matrix Interfacial Adhesion and Composite Properties," POLY Prep. 36(1), 819 (1995).
108. Davis, S. Gardner, A. Gonzales, J.S. Riffle, J.E. McGrath, J. Facinelli, K.L. Reifsnider, S. Case and J.J. Lesko, "Effect of Polyimide Interphase on Impact and Fatigue Properties of PEEK/Carbon Fiber Composites," POLY Prep. 36(1), 825 (1995).
109. D.M. Knauss, T.M. Yamamoto, T.H. Yoon, and J.E. McGrath, "Polycarbonate-Polydimethyl Siloxane Segmented Copolymers with Improved Hydrolytic Stability," PMSE Preprints, 72, 232, Anaheim, CA, Spring (1995).
110. P. Lakshmanan, S. Srinivas, G.L. Wilkes and J.E. McGrath, "High Temperature Polyimide Nanofoams Based on 9-Phenyl-9(Trifluoromethyl)Xanthene-2, 3, 6, 7-Tetracarboxylic Dianhydride," PMSE Preprints, 72, 264, Anaheim, CA, Spring (1995).
111. K.R. Carter, J.W. Labadie, R.A. DiPietro, M.I. Sanchez, T.P. Russell, S.A. Swanson, B.C. Auman, P. Lakshmanan, and J.E. McGrath, "Polyimide Nanofoams for Microelectronic Applications: Nanofoams Derived from 6FXDA/6FDAm-co-Polypropylene Oxide Copolymers," PMSE Preprints, 72, 383, Anaheim, CA, Spring (1995).
112. J.E. McGrath, S.K. Jayaraman, P. Lakshmanan, J.C. Abed, and F. Afchar-Taromi, "Polyimide Nanofoams: Materials Design and Development," POLY Preprints, 37:1 136 (1996).
113. H. Ghassemi, M. Curtis, E. Bonaplata, and J.E. McGrath, "Main Chain Poly(arylene ether) Phosphonium Ionomers," POLY Preprints, 37:1 420 (1996).
114. L. Dong, M.W. Muggli, A.R. Shultz, T.C. Ward and J.E. McGrath, "An Investigation of Non-Steric Exclusion Effects in Size Exclusion Chromatography," POLY Preprints, 37:1 481 (1996).
115. D.J. Riley, S.A. Srinivasan, A. Gungor, C. Tchatchoua, M. Sankarapandian, and J.E. McGrath, "Synthesis and Characterization of Novel Flame Resistant Poly(arylene ether)s," POLY Preprints, 37:1 489 (1996).
116. Q. Ji, M. Muggli, C. Tchatchoua, S. Srinivasan, T.C. Ward, and J.E. McGrath, "Synthesis and Characterization of Phosphorus Containing Segmented Polyurethanes," POLY Preprints, 37:1 579 (1996).
117. K. R. Carter, R. Richter, J.L. Hedrick, J.E. McGrath, D. Mecerreyes, and R. Jerome, "Synthesis of Amine-Terminated Aliphatic Polycarbonates and Aliphatic Polyesters via Al(Et)₂(OR) Initiated Polymerizations," POLY Preprints, 37:1 607 (1996).
118. Q. Ji, O. Kwon, H. Zhuang, Y.N. Liu, M. Muggli, K. Kwan, T.C. Ward and J.E. McGrath, "Modification of Epoxy Resins by Secondary Amino Terminated Poly(dimethyl Siloxane)," Polymer Preprints, 38:1, 107 (1997).
119. Y. Liu, A. Bhatnagar, Q. Ji, H. Zhuang and J.E. McGrath, "Synthesis and Characterization of Poly(phenylene sulfide sulfone): Part I," Polymer Preprints, 38:1, 109 (1997).
120. A. Bhatnagar, Y.N. Liu, M. Muggli, T.C. Ward, D.A. Dillard, H. Parvatareddy and J.E. McGrath, "Synthesis and Characterization of Polyphenylene sulfide sulfones: Part II," Polymer Preprints, 38:1, 111 (1997).
121. C. Tchatchoua, Q. Ji, S.A. Srinivasan, H. Ghassemi, T.H. Yoon, M. Martinez-Nunez, T. Kashiwagi, and J.E. McGrath, "Flame Resistant Epoxy Networks Based on Aryl Phosphine Oxide Containing Diamines," Polymer Preprints, 38:1, 113 (1997).
122. Q. Ji, M. Muggli, F. Wang, T.C. Ward, G. Burns, U. Sorathia and J.E. McGrath, "Synthesis and Characterization of Modified Segmented Polyurethanes Displaying Improved Fire Resistance," Polymer Preprints, 38:1, 219 (1997).
123. Q. Ji, Y.N. Liu, and J.E. McGrath, "Dielectric Relaxation Behavior of Modified Segmented Polyurethanes," Polymer Preprints, 38:1, 221 (1997).
124. Y. Liu, Q. Ji, and J.E. McGrath, "New Fire Resistant Epoxy Resins with Improved Toughness," Polymer Preprints, 38:1, 223 (1997).
125. H. Zhuang, B. Tan, C. Tchatchoua, Q, Ji, H. Ghassemi, and J.E. McGrath, "Influence of Diphenyl Methyl Phosphine Oxide Diamine Incorporation on the Synthesis, Physical and Fire Resistant Behavior of Thermoplastic Polyether Imides," Polymer Preprints, 38:1, 304 (1997).
126. M.J. Graham, S. Srinivas, A. Ayambem, V. Ratta, G.L. Wilkes and J.E. McGrath, "Effect of End Groups on the Thermal Stability of a Semicrystalline Polyimide," Polymer Preprints, 38:1, 306 (1997).
127. L. Wang, Q. Ji, and J.E. McGrath, "Synthesis and Characterization of Poly(dimethyl siloxane) Modified Polyurethane," Polymer Preprints, 38:1, 308 (1997).
128. M. Sankarapandian, H.K. Shobha, S. Kalachandra, D.F. Taylor, A.R. Shultz, and J.E. McGrath, "Synthesis of New Dental Composite Matrix Dimethacrylates," Polymer Preprints, 38:2, 92 (Las Vegas, NV), September (1997).
129. S. Kalachandra, D.F. Taylor, J.E. McGrath, M. Sankarapandian, and H.K. Shobha, "Structure-Property Relationships in Dental Composites Based on Polydimethacrylates," Polymer Preprints, 38:2, 94 (Las Vegas, NV), September (1997).
130. A. Bhatnagar, Y.N. Liu, J. F. Geibel, and J.E. McGrath, "Synthesis and Characterization of Advances Fire Resistant Engineering Thermoplastics," Polymer Preprints, 38:2, 227 (Las Vegas, NV), September (1997).
131. T.V. Holland, T.E. Glass, and J.E. McGrath, "Investigation of the Thermal Curing Chemistry of the Phenylethynyl Group," Polymer Preprints, 38:2, 371 (Las Vegas, NV), September (1997).
132. A. Ayambem, S. Mecham, Y. Sun, and J.E. McGrath, "Synthesis, Characterization, and Cure Studies of Phenylethynl-Terminated Poly(arylene ether sulfone)s," Polymer Preprints, 38:2, 373 (Las Vegas, NV), September (1997).
133. S.J. Mecham, W. Harrison, Y. Sun and J.E. McGrath, "Controlled Molecular Weight Amorphous Aromatic Polyester Via Melt Acidolysis," Polymer Preprints, 38:2, 400 (Las Vegas, NV), September (1997).
134. J.B. Mecham, Q. Ji, M. Muggli, T.C. Ward, and J.E. McGrath, "Synthesis and Characterization of Cycloaliphatic and Aromatic Polyester/Polydimethylsiloxane Segmented Copolymers," Polymer Preprints, 38:2, 442 (Las Vegas, NV), September (1997).
135. H. Zhuang, M. Sankarapandian, Q. Ji, and J.E. McGrath, "New Structural Adhesives Functionalized with End Groups of Controlled Reactivity," Proceedings of the 21st Annual Meeting of the Adhesion Society (R.A. Dickie, Ed.), Savannah, Georgia, February 22-25 (1998).
136. H. Parvatareddy, B. Jackson, J.G. Dillard, J.E. McGrath, T.C. Ward, and D.A. Dillard, "Durability of High Performance Polymeric Adhesives for Aircraft Applications," Proceedings of the 21st Annual Meeting of the Adhesion Society (R.A. Dickie, Ed.), Savannah, Georgia, February 22-25 (1998).
137. B. Jackson, J. Dillard, C.Creegan, H. Parvatareddy, D. Dillard, J.E. McGrath and R. Zatorski, "Adhesion and Durability Performance of Plasma-Sprayed Polymeric Coatings on Titanium," Proceedings of the 21st Annual Meeting of the Adhesion Society (R.A. Dickie, Ed.), Savannah, Georgia, February 22-25 (1998).
138. J. Wang, S. Wang, Q. Ji, J.E. McGrath, and T.C. Ward, "Toughness of Epoxy Resins with Poly(ether phosphine oxide -co- ether sulfone," Proceedings of the 21st Annual Meeting of the Adhesion Society (R.A. Dickie, Ed.), Savannah, Georgia, February 22-25 (1998).
139. J.E. McGrath, L.F. Wang, J.B. Mecham, and Q. Ji, "Synthesis and Characterization of Segmented Siloxane Copolymers," Polymer Preprints, 39:1, 455 (Dallas, TX), March (1998).
140. S. Wang, J. Wang, Q. Ji, A.R. Shultz, T.C. Ward and J.E. McGrath, "Investigation of Mechanical Properties and Morphologies of Non-Reactive Poly(arylene Ether Phenyl Phosphine Oxide/Sulfone) Copolymer Toughened Vinyl Ester Networks," Polymer Preprints, 39(2), p. 384, August (1998).
141. S. Wang, Q. Ji, C.T. Tchatchoua, A.R. Shultz, and J.E. McGrath, "Synthesis and Characterization of Poly(Arylene Ether Phosphine Oxide/Sulfone) Statistical Copolymers and Their Blends with Poly(Hydroxy Ethers) (?Phenoxy Resin?)," Polymer Preprints, 39(2), p. 410, August (1998).
142. Q. Ji, J. Wang, O. Kwon, T.C. Ward, and J.E. McGrath, "Secondary Amino Terminated Poly(dimethyl Siloxane) Modified Epoxy Resins," Polymer Preprints, 39(2), p. 546, August (1998).
143. N. Gunduz, A.R. Shultz, H.K. Shobha, M. Sankarapandian, and J.E. McGrath, "Photopolymerization Kinetics of New Dimethacrylates by Photo DSC," Polymer Preprints, 39(2), p. 647, August (1998).
144. J. Wang, S. Wang, Y. Liu, Q. Ji, O. Kwon, J.E. McGrath and T.C. Ward, "Hydrogen Bonding Characterization in Phosphine Oxide Containing Copolymer/Epoxy Systems," Polymer Preprints, 39(2), p. 737, August (1998).
145. D.L. Dunson, M. Sankarapandian, T.E. Glass, H. Oyama, I.V. Farr, and J.E. McGrath, "Synthesis and Characterization of Thermosetting Fluorinated Polyimides for Microelectronics Packaging," Polymer Preprints, 39(2), p. 796, August (1998).
146. J. Wang, S. Wang, H. Kang, Q. Ji, O. Kwon, J.E. McGrath and T.C. Ward, "Phosphine Oxide Containing Copolymer Toughened Epoxy," PMSE Preprints, 79, p. 184, August (1998).
147. W.D. Polk, S.J. Mecham, S. Wang, M. Sankarapandian, T.E.Glass and J.E. McGrath, "Segmented Poly(arylene ether phosphine oxide)-Poly(dimethylsiloxane) Copolymers, Polymer Preprints, 40 (2), p. 929, August (1999).
148. Q. Ji, J. Wang, S. Wang, H. Kang, T.E. Glass, and J.E. McGrath, "Fluorinated Oxetane Polyol Modified Segmented Polyurethane Elastomers," Polymer Preprints, 40 (2), pp. 930-931, August (1999).
149. D. Dunson, S.J. Mecham, I.V. Farr, Q. Ji, and J.E. McGrath, "Film Formation in Reactive Oligomeric Polyimides and Polyamic Acids," PMSE Preprints, _____ August (1999).
150. S. Wang, T.E. Glass, H. Zhuang, M. Sankarapandian, Q. Ji, A.R. Shultz, and J.E. McGrath, "Miscibility of Phosphine Oxide Containing Poly(imide) and Bisphenol A Poly(hydroxy ether)s," Polymer Preprints, 40 (2), pp. 744-745, August (1999).
151. J.E. McGrath, S.J. Mecham, M.A. Hickher, S. Wang, H.K. Shobha, Y. Oishi, and M. Sankarapandian, "Synthesis and Characterization of Poly(arylene ether/thioether phenyl phosphine oxide)s, Polymer Preprints, 40 (2), pp. 1291-1292, August (1999).

| back to top |

2000 - present

1. H.K. Shobha, G.R. Smalley, M. Sankarapandian, and J.E. McGrath, "Synthesis and Characterization of Sulfonated Poly(arylene ether)s Based on Functionalized Triphenyl Phosphine Oxide for Proton Exchange Membranes," Polymer Preprints, 41 (1), March (2000).
2. N. Gunduz and J.E. McGrath, "Synthesis and Characterization of Sulfonated Polyimides," Polymer Preprints, 41 (1), March (2000).
3. M. Sankarapandian, P. Shih, G.L. Hendren, V. Gabara, A.C. Loos, and J.E. McGrath, "Fabrication and Properties of New Aramid Fiber-Cyanate Ester Composites," Polymer Preprints, 41 (1), March (2000).
4. J. Yang, A.K. Banthia, D. Godshall, G. Wilkes, P. Rangarayan, D.G. Baird, and J.E. McGrath, "Synthesis and Characterization of Melt Processable Acrylonitrile Acrylate Statistical Copolymers Via Free Radical Aqueous Slurry Polymerization," Polymer Preprints, 41 (1), March (2000).
5. F. Wang, Q. Ji, W. Harrison, J. Mecham, J.E. McGrath, R. Formato, and R. Kovar, "Synthesis and Characterization of Novel Sulfonated Poly(arylene ether sulfone)s," Polymer Preprints, 41 (1), March (2000).
6. Q. Ji, H. Kang, J. Wang, S. Wang, T. Glass and J.E. McGrath, "Surface Characterization of Fluorinated Oxetane Polyol Modified Polyurethane Block Copolymers," Polymer Preprints, 41 (1), p. 346, March (2000).
7. W. Harrison, H. Shobha, F. Wang, J. Mecham, T. Glass, K. O'Connor, and J.E. McGrath, "Influence of Bisphenol Structure on the Direct Synthesis of Sulfonated Poly(arylene ether)s," Polymer Preprints, 41 (2), p. 1239, August (2000).
8. H.K. Shobha, M. Sankarapandian, T.E. Glass, and J.E. McGrath, "Sulfonated Aromatic Diamines as Precursors for Polyimides for Proton Exchange Membranes," Polymer Preprints, 41 (2), p. 1298, August (2000).
9. M. Sankarapandian, P. Shih, V. Gabara, G.L. Hendren, A.C. Loos, and J.E. McGrath, "Fabrication and Properties of New Aramid Fiber-Cyanate Ester Composites," Polymer Preprints, 41 (2), p. 1342, August (2000).
10. S. Wang, H. Zhuang, M. Sankarapandian, H.K. Shobha, Q. Ji, A.R. Shultz, and J.E. McGrath, "Phosphine Oxide Containing Polymer Based Metal Salts/Polymer and Silica/Polymer Hybrid Nanocomposites," Polymer Preprints, 41 (2), p. 1350, August (2000).
11. J.E. McGrath, L. Rasmussen, H. Shobha, M. Sankarapandian, "Photo-Curable Polymers Based on Methacrylates and Dimethacrylates Containing Carbazole," Polymer Preprints, 41 (2), p. 1363, August (2000).
12. M.A. Hickner, A. Banthia, and J.E. McGrath, "Synthesis and Characterization of Phosphine Oxide Diol Modified Epoxy Adhesives," Polymer Preprints, 41 (2), p. 1372, August (2000).
13. W.D. Polk, S. Wang, Y. Kim, M. Sankarapandian, T.E. Glass, and J.E. McGrath, "Perfectly Alternating Poly(arylene ether phosphine oxide)-B-Poly(dimethylsiloxane) Copolymers," Polymer Preprints, 41 (2), p. 1385, August (2000).
14. J. Mecham, H.K. Shobha, F. Wang, W. Harrison, and J.E. McGrath, "Synthesis and Characterization of Controlled Molecular Weight Sulfonated Aminofunctional Poly(arylene ether sulfone)s Prepared by Direct Polymerization," Polymer Preprints, 41 (2), p. 1388, August (2000).
15. F. Wang, J. Mecham, W. Harrison, and J.E. McGrath, "Synthesis of Sulfonated Poly(phenylene sulfide sulfone)s Via Direct Polymerization," Polymer Preprints, 41 (2), p. 1401, August (2000).
16. N. Gunduz and J.E. McGrath, "Wholly Aromatic Five- and Six-Membered Ring Polyimides Containing Pendant Sulfonic Acid Functional Groups," Polymer Preprints, 41 (2), p. 1565, August (2000).
17. J.E. McGrath, L. Rasmussen, H. Shobha, M. Sankarapandian, and K.E. Uhrich, "Carbazole Based Methacrylates and Dimethacrylates," PMSE Preprints, 38, p. 228 August (2000).
18. J.B. Mecham F. Wang, T.E. Glass, J. Xu, G.L.Wilkes and J.E. McGrath, "Sulfonated Poly(arylene ether): -B-Poly(imide) Segmented Copolymers," PMSE Preprints, 84, 105, San Diego, CA, Spring (2001).
19. Y.S. Kim, J.S. Lee, Q. Ji, and J.E. McGrath, "Surface Properties of Fluorinated Oxetane Polyol Modified Polyurethanes," PMSE Preprints, 84, 349, San Diego, CA, Spring (2001).
20. W. Harrison, F. Wang, J. Mecham, T.E. Glass, M. Hickner, and J.E. McGrath, "Influence of Bisphenol Structure on the Direct Synthesis of Sulfonated Poly(arylene ether)s," PMSE Preprints, 84, 688, San Diego, CA, Spring (2001).
21. W.D. Polk, S. Wang, Y. Kim, M. Sankarapandian, H.K. Shobha, T.E. Glass, and J.E. McGrath, "Synthesis and Characterization of Segmented Poly(arylene ether phosphine oxide)-B-Poly(dimethylsiloxane) Copolymers," PMSE Preprints, 84, 794, San Diego, CA, Spring (2001).
22. N. Gunduz, T.Y. Inan, E. Yildiz, and J.E. McGrath, "Sulfonated Six-Membered Ring Polyimides as Proton Exchange Exchange Membranes: Synthesis and Characterization," PMSE Preprints, 84, 911, San Diego, CA, Spring (2001).
23. F. Wang, J. Mecham, W. Harrison, M. Hickner, Y.S. Kim, and J.E. McGrath, "Synthesis of Sulfonated Poly(arylene ether phosphine oxide sulfone)s Via Direct Polymerization," PMSE Preprints, 84, 913, San Diego, CA, Spring (2001).
24. M. Hickner, F. Wang, Y.S. Kim B. Pivovar, T. Zawodzinski, and J.E. McGrath, "Development of Thin-Film Fuel Cell Electrodes Containing Novel Polymers," 2001 Joint International Electrochemical Society Meeting, San Francisco, CA, September 2-7, 2001.
25. M. Hickner, F. Wang, Y.S. Kim, B. Pivovar, T. Zawodzinski, and J.E. McGrath, "Chemistry-Morphology-Property Relationships of Novel Proton Exchange Membranes," 2001 Joint International Electrochemical Society Meeting, San Francisco, CA, September 2-7, 2001.
26. P. Pivovar, M. Hickner, J. McGrath, P. Zelenay, and T. Zawodzinski, "Problems with Membrane Electrode Assemblies for Non-Nafion Based Membranes," 2001 Joint International Electrochemical Society Meeting, San Francisco, CA, September 2-7, 2001.
27. D. Ofer, B. Nair, R. Kovar, S. Mukerjee, and J.E. McGrath, "Liquid Crystal Polymer/Sulfonated Polyphenylene Sulfone Microcomposite Membranes for High Temperature PEM Fuel Cells," 2001 Joint International Electrochemical Society Meeting, San Francisco, CA, September 2-7, 2001.
28. J. Hoyt, Y.S. Kim, J.E. McGrath, and J. S. Riffle, "Functionalized Polysiloxanes as Fine Dispersants for Metal Particulates, ACS Polymer Preprints, 43(1), 350 (2002).
29. Y.S. Kim, F. Wang, M. Hickner, T. Zawodzinski, and J.E. McGrath, "Heteropolyacid Sulfonated Poly(arylene ether phosphine oxide) Copolymer Composite Membranes for Proton Exchange Membrane Fuel Cells, ACS Polymer Preprints, 43(1), 342 (2002).
30. F. Wang, T. Glass, Xi Li, M. Hickner, Y.S. Kim and J. McGrath, "Synthesis and Characterization of Controlled Molecular Weight Poly(arylene ether sulfone) Copolymers Bearing Sulfonate Groups by Endgroup Analysis," ACS Polymer Preprints, 43(1), 492, (2002).
31. Y.T. Hong, B. Einsla, Y.S. Kim and J.E. McGrath, "Synthesis and Characterization of Sulfonated Polyimides Based on Six-Membered Rings as Proton Exchange Membranes," ACS Polymer Preprints, 43(1), 666, (2002).
32. V.A. Bhanu, K. Wiles, M. Bortner, D. Godshall, T. Glass, D. Baird, G. Wilkes and J.E. McGrath. "Synthsis and Rheological Studies of Polyacrylonitrile Copolymer Carbon Fiber Precursor Using Cost Effective Water Based Synthesis Route," ACS Polymer Preprints, 43(1), 674, (2002).
33. H. Ghassemi and J.E. McGrath, "Synthesis of Phosphonium Salts," ACS Polymer Preprints, 43(1), 541, (2002).
34. W. Harrison, F. Wang, Y. Kim, M. Hickner, and J.E. McGrath, "Synthesis, Characterization, and Morphological Influence of Bisphenol Structure on the Direct Synthesis of Poly(arylene ether sulfone) Copolymers," ACS Polymer Preprints, 43(1), 700, (2002).
35. V.A. Bhanu, K.B. Wiles, M. Bortner, T.E. Glass, D. Godshall, D.G. Baird, G.L. Wilkes, and J.E. McGrath, "Designing the Molecular Composition of the Melt Processable Acrylonitrile Copolymer Carbon Fiber Precursor," ACS Polymer Preprints, 43(2), 1017, (2002).
36. K.B. Wiles, V.A. Bhanu, F. Wang, and J.E. McGrath, "Synthesis and Characterization of Sulfonated Poly(arylene sulfide sulfone) Copolymers as Candidates for Proton Exchange Membranes," ACS Polymer Preprints, 4 3(2), 993, (2002).
37. H. Ghassemi and J.E. McGrath, "Proton-Conducting Polymers Derived from Poly(p-Phenylenes)s, ACS Polymer Preprints, 43 (2), 1021, (2002).
38. W.L. Harrison, K. O'Connor, N. Arnett, and J.E. McGrath, "Homogeneous Synthesis and Characterization of Sulfonated Poly(arylene ether sulfone)s Via Chlorosulfonic Acid," ACS Polymer Preprints, 43 (2), 1159, (2002).
39. M. Hickner, B. Pivovar, Y. Kim, J. McGrath and P. Zelenay, "The Effect of BPSH Post Treatment on DMFC Performance and Properties," Electrochemical Society Fall Meeting, Third International Symposium on Proton Conducting Membrane Fuel Cells, October 2002, Salt Lake City, Utah.
40. M.A. Hickner, F. Wang, Y.S. Kim, B. Pivovar, T. Zawodzinski, and J.E. McGrath, "Influencing the Transport of Water, Methanol, and Protons Through a Fuel Cell Ion Exchange Membrane," American Institute of Chemical Engineers, 2002, 2446-2455, New Orleans, LA, March 2002.
41. K.B. Wiles, V. A. Bhanu, F. Wang, M.A Hickner, and J.E. McGrath, "Poly(arylene thioether sulfone) Copolymers for PEM-Based Fuel Cell Systems, Polymer Preprints 2003, 44(1), 1089.
42. Harrison, William L.; Wang, Feng; O'Connor, Kerry; Arnett, Natalie Y.; Kim, Yu Seung; McGrath, J. E. Sulfonated poly(arylene ether sulfones) containing hexafluoroisopropylidene unit: Influence of sulfonic acid position on stability and other properties. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) (2003), 44(1), 849.
43. M.J. Sumner, M. Sankarapandian, U. Sorathia, J.E. McGrath and J.S. Riffle, "Synthesis of Phthalonitrile Monomers and Networks," Polymer Preprints 2003, 44 (1), 42.
44. M. Sankir, V.A. Bhanu, H. Ghassemi, K.B. Wiles, M.L. Hill, W. Harrison, M. Sumner, T.E. Glass, J.S. Riffle and J.E. McGrath, "Systematic Study of the Synthesis and Characterization of 3,3'-Sulfonyl Bis(6-Chloro benzene sulfonic acid) Disodium Salt Monomer for Proton Conducting Polymeric Membranes in Fuel Cell Applications," Polymer Preprints 2003, 44 (1), 1079.
45. H. Ghassemi, G. Ndip, and J.E. McGrath, "New Multiblock Copolymers of Sulfonated Poly(4'-Phenyl-2,5-Benzophenone) and Poly(arylene ether sulfone) for Proton Exchange Membranes," Polymer Preprints 2003, 44 (1), 814.
46. L. Dong, Y.S. Kim, F. Wang, M. Hickner, T.E. Glass, and J.E. McGrath, "Self-Diffusion of Water in Sulfonated Poly(arylene ether sulfone) Copolymers by Pulse Field Gradient NMR," Polymer Preprints 2003, 44 (1), 355.
47. V.A. Bhanu, M. Bortner, T. Mukundan, T.E. Glass, D.G. Baird, and J.E. McGrath, "Study of the Accelerating Effect of water I the Copolymerization of Acrylonitrile with Methyl Acrylate in Emulsion and Solution Processes," Polymer Preprints 2003, 44 (1), 1067.
48. J.E. McGrath, M. Hickner, Y.S. Kim, F. Wang, W. Harrison, and M. Hill, "New Proton Exchange Membranes (PEM) for Direct Methanol Fuel Cells (DMFC)," Polymer Preprints 2003, 44 (1), 1067.
49. Y.S. Kim, Limin Dong, Michael Hickner, Bryan Pivovar, and James E. McGrath, "Methanol Permeation of Sulfonated Poly(arylene ether sulfone) Block Copolymers, Polymer Preprints 2003, 44 (1), 1254.
50. Mukundan, T.; Bhanu, V. A.; Wiles, K. B.; Bortner, M.; Baird, D. G.; McGrath, J. E. Photocrosslinkable acrylonitrile terpolymers as carbon fiber precursors. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) (2003), 44(2), 651-652.
51. Cho, Chang Gi; Kim, Yuseung; Hill, Melinda; McGrath, James E. Synthesis and characterization of poly(arylene ether sulfone) copolymers with sulfonimide side groups. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) (2003), 44(2), 649-650.
52. Einsla, Brian R.; Kim, Young Jun; Tchatchoua, Charles; McGrath, James E. Disulfonated polybenzoxazoles for proton exchange membrane fuel cell applications. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) (2003), 44(2), 645-646.
53. Akle, Barbar J.: Leo, Donald J.; Hickner, Mike; McGath, James. "Electroactive Polymers Based on Novel Ionomers," Proceedings of the ASME Aerospace Division, 2003, 445-452.
54. K.B. Wiles, C. M. de Diego and J .E. McGrath, "Poly(arylene sulfide sulfone) Copolymer Composites for Proton Exchange Membrane Fuel Cell Systems: Extraction and Conductivity," Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) (2004), 45(1),724-25.
55. M. Sankir, W.L. Harrison, K.B. Wiles, Y. Li, and J.E. McGrath, "Proton Exchange Membrane Fuel Cells: Synthesis and Characterization of Disulfonated Poly(arylene ether benzonitrile) Copolymers," American Chemical Society, Division of Fuel Chemistry Preprints, (2004), 49(2), 526-527.
56. Hossein Ghassemi, William Harrison, Tom A. Zawodzinski, Jr., and James E. McGrath,, "New Multiblock Copolymers Containing Hydrophilic-Hydrophobic Segments For Proton Exchange Membrane," Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) (2004), 45(1),68-69.
57. B. R. Einsla and J.E. McGrath, "Synthesis and Characterization of Hydroxy-Functionalized Poly (arylene ether sulfone)s and Conversion to Proton Conducting Membranes for Fuel Cells," American Chemical Society, Division of Fuel Chemistry Preprints, (2004), 49(2), 616-618.
58. Roy, A.; Einsla, B.R.; Harrison, William L.; and McGrath J.E. "Synthesis and Characterization of Hydroquinone based Disulfonated Poly(arylene ether sulfone)s Via Direct Copolymerization," American Chemical Society, Division of Fuel Chemistry Preprints, (2004), 49(2), 614-615.
59. McGrath, James E.; Wilkes, Garth L.; Ward, Thomas C. Polymer education at Virginia Tech: Continuing education. Abstracts of Papers, 227th ACS National Meeting, Anaheim, CA, United States, March 28-April 1, (2004).
60. C. Tchatchoua, W.L. Harrison, B.R. Einsla, M. Sankir, Y.S. Kim, B. Pivovar, and J.E. McGrath, "Novel Sulfonated Proton Exchange Membranes for Fuel Cell Applications: Partially Fluorinated Copolymers," American Chemical Society, Division of Fuel Chemistry Preprints, (2004), 49(2), 601-602.
61. H. Wang, W. Harrison, J. Yang, and J.E. McGrath, "Synthesis of Substituted Poly (p-phenylene)s by Nickel (O) Catalyzed Coupling Reaction and Derived Multiblock Copolymers for Proton Exchange Membrane Fuel Cells," American Chemical Society, Division of Fuel Chemistry Preprints, (2004), 49(2), 586-587.
62. M.L. Hill, B.R. Einsla, Y.S. Kim, and J.E. McGrath, "Synthesis and Characterization of Sulfonated Poly(arylene ether sulfone)/Zirconium Phenylphosphonate Composite Membranes for Proton Exchange Membrane Fuel Cell Applications," American Chemical Society, Division of Fuel Chemistry Preprints, (2004), 49(2), 584-585.
63. K.B. Wilkes, C. Munoz, and J.E. McGrath, "Disulfonated Poly(arylene ether phenyl phosphine oxide sulfone) Terpolymers for PEM Fuel Cell Systems," American Chemical Society, Division of Fuel Chemistry Preprints, (2004), 49(2), 538-540.
64. Y. Li, T. Mukundan, W. Harrison, M.L. Hill, M. Sankir, J. Yang, and J.E. McGrath, "Direct Synthesis of Disulfonated Poly(arylene ether ketones)s and Investigation of Their Behavior as Proton Exchange Membrane (PEM)," American Chemical Society, Division of Fuel Chemistry Preprints, (2004), 49(2), 536-537.
65. Arnett, Natalie Y.; Harrison, William L.; Dong, Limin; McGrath, J. E. Hydrocarbon and partially fluorinated sulfonated copolymer blends as functional membranes for fuel cells. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry (2005), 50(2), 534-535.
66. Sankir, Mehmet; Kim, Yu Seung; Harrison, William L.; Badami, Anand S.; McGrath, James E. Proton exchange membrane for DMFC and H2/air fuel cells: II. Synthesis and characterization of partially fluorinated disulfonated poly (arylene ether benzonitrile) copolymers. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry (2005), 50(2), 568-570.
67. Roy, Abhishek; Hickner, Michael; Glass, Tom; Li, Yanxiang; Einsla, Brian; Wiles, K. B.; Yu, Xiang; McGrath, James E. States of water- investigating the water-polymer interactions and transport phenomenon in proton exchange membranes. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry (2005), 50(2), 699-700.
68. Johnson, H.; Mukundan, T.; Bhanu, V. A.; Wiles, K. B.; Bortner, M.; Baird, D. G.; McGrath, J. E. Emulsion polymerization routes to photocrosslinkable melt processible acrylonitrile terpolymer as carbon precursors for gas diffusion layer (GDL). Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) (2005), 46(2), 886-887.
69. Badami, Anand S.; Einsla, Brian; Hill, Melinda; Wiles, Kenton B.; McGrath, James E. Morphological analysis by atomic force microscopy (AFM) of partially fluorinated disulfonated poly(arylene ether sulfone) copolymers, Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry (2005), 50(2), 703-704.
70. Yang, Juan; Li, Yanxiang; Wang, Hang; Mill, Melinda; Yu, Xiang; Wiles, Kenton B.; Lee, Haw-Seung; McGrath, James E. Viscometric behavior and molecular weight characterization of sulfonated poly(arylene ether sulfone) copolymers. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, (2005), 50(2), 701-702.
71. Hill, Melinda L.; Einsla, Brian R.; McGrath, James E. Partially fluorinated poly(arylene ether sulfone) copolymers modified with zirconium hydrogen phosphate for proton exchange membranes. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, (2005), 50(2), 652-653.
72. Wang, Hang; McGrath, James E. Synthesis of poly(arylene ether sulfone)-substituted poly(P-phenylene) multiblock copolymers for proton exchange membranes. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, (2005), 50(2), 581-582.
73. Lee, Hae-Seung; Einsla, Brian; McGrath, James E. Synthesis and characterization of segmented sulfonated poly(arylene ether)-B-polyimide copolymers as proton exchange membranes. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, (2005), 50(2), 579-580.
74. Yu, Xiang; Roy, Abhishek, McGrath, James E. Synthesis and characterization of multiblock copolymers for proton exchange membranes. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, (2005), 50(2), 577-578.
75. Li, Yanxiang; Yang, Juan; Roy, Abhishek; Einsla, Brian; Wang, Feng; McGrath, James E. Partially Fluorinated disulfonated poly(arylene ether sulfone) copolymers with controlled molecular weights and their applications to proton exchange membrane fuel cells. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, (2005), 50(2), 573-574.
76. Einsla, Brian R.; Harris, Linda A.; Hill, Melinda L.; McGrath, James E. Direct copolymerization of wholly aromatic and partially fluorinated disulfonated poly(arylene ether sulfone)s. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry, (2005), 50(2), 571-572.
77. McGrath, James E.; Wiles, Kenton B.; Akle, Barbar, J.; Bennett, Matthew; Leo. Ionic disulfonated poly(arylene ether sulfone) copolymer (BPSH) transducers as electromechanical system components for sensors and actuators, American Chemical Society, Division of Polymer Chemistry, (2005), 229th ACS National Meeting, San Diego, CA.
78. McGrath, James E. Advances in proton exchange membranes for fuel cells. Abstracts of Papers, 229th ACS National Meeting, San Diego, CA, March 13-17, 2005 PMSE Preprints (2005), 92, 243.
79. Arnett, Natalie Y.; Harrison, William L.; Dong, Limin; McGrath, J. E. Hydrocarbon and partially fluorinated sulfonated copolymer blends as functional membranes for fuel cells. PMSE Preprints (2006), 95 136-137.
80. Badami, Anand S.; Lee, Hae-Seung; Li, Yanxiang; Roy, Abhishek; Wang, Hang; McGrath, James E. Morphological analysis of molecular weight effects upon non- and partially-fluorinated disulfonated poly(arylene ether sulfone)-based random and multiblock copolymers for fuel cells. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry (2006), 51(2), 612-614.
81. Roy, A.; Yu, X.; Badami, A.; McGrath, James E. Multiblock hydrophilic-hydrophobic proton exchange membranes for fuel cells. PMSE Preprints (2006), 94 169-170.
82. Yu, Xiang; Roy, Abhishek; McGrath, James E. Perfluorinated-sulfonated hydrophobic-hydrophilic multiblock copolymers for proton exchange membranes (PEMs). PMSE Preprints (2006), 95 141-142.
83. McGrath, James E. Progress in alternate proton exchange membrane materials for fuel cells. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry (2006), 51(2), 371-372.
84. Li, Yanxiang; Roy, Abhishek; Badami, Anand S.; Yang, Juan; Zhang, Zhongbiao; McGrath, James E. Synthesis and characterization of partially fluorinated poly(arylene ether ketone)- poly(arylene ether sulfone) (6FK-BPSH) multiblock copolymers containing sulfonate groups for proton exchange membrane. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry (2006), 51(2), 682-683.
85. Lee, Hae-Seung; Roy, Abhishek; Badami, Anand S.; McGrath, James E. Synthesis of multiblock copolymers based on sulfonated segmented hydrophilic-hydrophobic blocks for proton exchange membranes. PMSE Preprints (2006), 95 210-211.
86. Wang, Hang; Badami, Anand S.; Roy, Abhishek; McGrath, James E. Synthesis of poly(arylene ether sulfone)-poly(benzophenone) multiblock copolymers for proton exchange membrane. PMSE Preprints (2006), 95, 202-203.
87. Roy, Abhishek; Lee, Hae- Seung; Badami, Anand S.; Yu, Xiang; Li, Yanxiang; Glass, Thomas E.; McGrath, James E .Transport properties of multiblock hydrophilic-hydrophobic protein exchange membranes for fuel cells. Preprints of Symposia - American Chemical Society, Division of Fuel Chemistry (2006), 51(2), 660-661.
88. Paul, Mou; Roy, Abhishek; Park, H. B.; Freeman, Benny D.; Riffle, Judy S.; McGrath, James E. Synthesis and crosslinking of poly(arylene ether sulfone) blend membranes. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) (2007), 48(1), 334-335.
89. Roy, Abhishek; Yu, Xiang; Lee, Hae-Seung; Badami, Anand S.; Dunn, Stuart; McGrath, James E. Proton exchange membranes for fuel cell applications. Polymer Preprints (American Chemical Society, Division of Polymer Chemistry) (2007), 48(1), 246-247.
90. McGrath, J. E. From polyurethanes to higher performance segmented and multiblock copolymers: Tutorial. Abstracts of Papers, 233rd ACS National Meeting, Chicago, IL, United States, March 25-29, 2007 (2007), POLY-116.
91. Park, Ho Bum; McGrath, J. E. Desalination properties of sulfonated polysulfones. Abstracts of Papers, 233rd ACS National Meeting, Chicago, IL, United States, March 25-29, 2007 (2007).
92. McGrath, J. E. Progress in alternate proton exchange membrane materials for fuel cells. Abstracts of Papers, 234th ACS National Meeting, Boston, MA, United States, August 19-23, 2007 (2007)
93. McGrath, J. E. Applying the polymer parameters to advanced polymeric membrane systems. Abstracts of Papers, 234th ACS National Meeting, Boston, MA, United States, August 19-23, 2007 (2007).

| back to top |

U.S. Patents:

1968 - 1974

Please send any questions or comments to the webmaster.

Updated 4/18/2008